Most Orders Ship in 24 Hours
No USA Border Charges After Purchase
Shipping Prices Available at Checkout
Most Orders Ship in 24 Hours
No USA Border Charges After Purchase
Shipping Prices Available at Checkout
It’s impossible to claim that one magnetic sweeper will work for any manufacturing facility, but one thing all facilities that work with metal share is the need to clean up scrap, chips, grinding dust, and swarf. The size of the metal debris that needs to be cleaned up, and how big the area that is contaminated is, will determine the manufacturing magnetic sweeper that is best suited to the facility. Magnetic sweepers for factories and fabrication facilities make cleanup quicker with less risk of cuts and punctures to the workers doing the cleaning.
$128.99 – $1,981.46 USD
Available in 1 size:Â Powerstik 12″
Get prices, specs, photos, videos, reviews and more…
The Powerstik Magnet reaches areas a wheeled sweeper cannot and was designed for superior access to get in and around common obstructions that can be encountered when cleaning up after a job - pipes, wires, plants, garden decorations and more...
The Powerstik is a magnet sweep that can get to places a wheeled sweeper can’t, because of its super slim profile and hook design. It is simple to get right on top of the debris that needs to get picked up, so the magnetic performance is better than its size might suggest.
Cleaning collected debris from the magnet is simple, hold the Powerstik over a bin and clean it off with one swipe of your hand in seconds. The Powerstik handheld magnet sweep is best for cleaning common metal debris types like nails, screws, staples, nuts and bolts from the hardest areas to reach on any job site.
$247.99 – $1,981.46 USD
Available in 1 size:Â Powerstik Pro 12″
Get prices, specs, photos, videos, reviews and more…
The Powerstik Pro model is a more powerful and just as versatile variation of the original Powerstik, it has almost 2x more magnetic power on the surface of the clean off sleeve thanks to the Super Blue magnets inside but retains the 1 handed maneuverability that made the original a hit with roofing professionals. Because of the increase in power, this new magnet needed an easier way to clean the debris off.
Included with the Powerstik Pro is the new Quick Clean Off Sleeve that can be installed in four positions which grants four different sets of wear bars to use up on hard surfaces before the sleeve needs to be replaced.
The increased pickup and holding power of the Pro model allows for faster and more thorough debris retrieval in spaces that regular magnetic sweepers can’t reach. Say goodbye to bending over and digging around in gardens and under decks to get dropped screws and nails, the hook design of the Powerstik Series can pull metal from gardens, decks, bushes and around any other obstacles.
$322.99 – $2,364.99 USD
Available in 1 size:Â Powerstik Pro Elite 12″
Get prices, specs, photos, videos, reviews and more…
The Powerstik Pro Elite is Bluestreak’s premium handheld magnetic sweeper built for professionals with over 2x more power than the original Powerstik. This additional power increases the speed you can clean an area by picking up more per pass and holding more debris before needing to clean the magnet.
The Pro Elite comes with the new Powerstik Quick Clean-Off sleeve that removes debris with a press of a button and slide of the sleeve. It also doubles as a wear bar to prevent damaging the aluminum housing when dragging on hard surfaces, it has four sides so you can flip it around multiple times when a side gets worn out.
The new adjustable height arm rest allows for easy maneuvering of the 4.3lbs sweeper by people of different heights.
The new rare earth Super Blue magnet system in this sweeper will pick up a nail from 3.25” and will hold an impressive amount of weight making it perfect for picking up any metal debris in tight spaces.
$548.99 – $658.99 USD
Available in 3 sizes: Bora 25, Bora 31, Bora 37
Get prices, specs, photos, videos, reviews and more…
Packed with two layers of C8 grade magnets
The Bora magnetic sweeper is the biggest push magnet designed for flat surfaces such as concrete or asphalt. It has two layers of C8 ceramic magnets packed end to end un-spaced and a steel backing plate to make the magnetic field larger and extend it downward.
It is similar to the RIP magnet in terms of pickup power with a lifting height of 5 and 3/4 inches. The Bora is also designed with a super strong supporting back frame in the form of a 2” by 2” tube welded to both sides to increase the Bora’s durability.
The Bora is also loaded with features. It is designed for professionals who needs pick up power, durability and wider widths. Sizes: 25, 31 and 37 widths.
$989.99 – $2,609.99 USD
Available in 6 sweeping widths: 38″, 50″, 62″, 74″, 86″, 98″
Get prices, specs, photos, videos, reviews and more…
With 10” inch x 3” inch wide flat proof Bumper wheels. The EIGER was designed for those slightly more off-road surfaces with more uneven surfaces such as dirt and gravel where potholes and bumps exist.
Designed with wide wheels to stay on top of those surfaces, and also designed with a greater minimum sweeping height of 2.5”inches to prevent the sweeper from hitting the ground.
Comes standard with black PVC Quick Clean Off Sleeve for easy debris removal, and 4 hanging chains with 8 quick clips to hang the EIGER from your vehicle.
$9,169.99 USD
Available in 1 sweeper width: Yacare 72″
Get prices, specs, photos, videos, reviews and more…
The Yacare magnetic sweeper is a 72 inch wide, durable off road tow behind magnetic sweeper with an easy to use Spring Assisted Clean Off system and torsion ride suspension that smooths out rough terrain!
The Yacare clean off system is entirely different from both the HOG and RHINO. It replaces the Quick Clean Off Sleeve system with an easier to use, more durable long term solution that's especially helpful for heavy debris conditions.
More power and advanced durability provided by all steel and stainless steel construction and easy effortless clean off with dual debris release levers provide sound rationale to move up from the Rhino to the Yacare.
Yet the Yacare keeps all the features that makes the Rhino so popular; the pick up performance in off road conditions provided by the "wrap around" design, the adjustable sweep height, flat proof tires, adjustable hitch height and optional debris digging rake accessory. The suspension system also increases towability of the Yacare magnet through rough terrain, reducing strain on the chassis of the sweeper and tow vehicle.
Replacing the safety flags on the Rhino are the RED colored lid and “MAGNETIC SWEEPER” signage on the back of the Yacare unit, to ensure that high visibility is maintained.
This thing is built like a tank! Check out the CAD drawings.
$14,029.99 USD
Available in 1 sweeper width: Caiman 82″
Get prices, specs, photos, videos, reviews and more…
The Caiman magnetic sweeper is one step up from the Yacare magnetic sweeper.
It is like the Yacare because it has an enclosed magnet and Dual Spring Assisted Debris Release Handles, but it's wider at 82 inch wide and has much more power with 50% more magnets.
More power and wider sweeping width makes it a good choice for towing behind pickup trucks, larger tractors and UTVs such as John Deere Gators, Kubota side by sides, etc.
The Caiman also has solid pick up performance in off road conditions provided by the "wrap around" design, the adjustable sweep height, flat proof tires, adjustable hitch height and optional debris digging rake accessory. The torsion ride suspension system increases control in rough terrain and reduces stress on the sweeper and tow vehicle’s chassis.
$2,099.99 – $2,449.99 USD
Available in 5 sizes:
Forager 26″, Forager 32″, Forager 38″, Forager 44″, Forager 50″
Get prices, specs, photos, videos, reviews and more…
The Forager can adjusted to fit almost every brand and size of forklift on the market right out of the box.
It comes in 5 sweeping widths, multiple installation bracket positions combined with adjustable sweeping height. The fitting options ensure different height and sized forklifts of every kind are accommodated.
The Forager also features a Quick Clean Off Sleeve which makes cleaning debris off the magnet bar easy.
$6,689.99 – $7,229.99 USD
Available in 3 sweeper widths: 31″, 39″ 47″
Get prices, specs, photos, videos, reviews and more…
The Forager XL is a bigger version of the popular Forager magnetic sweeper that used to be the largest rear mounted forklift magnet available on the market. It can adjust to fit almost any forklift on the market right out of the box. The Forager XL steel mounting bracket attaches to the rear pin of a forklift and is vented to allow for exhaust gases to flow freely even if it is routed through the rear pin port. This bracket hugs the counterweight on the forklift and allows the Forager XL to mount on most forklift rear pins.
The Forager XL Heavy Duty Rear Mounted Forklift Magnet comes in 3 sweeping widths and features a 7x7” permanently charged C8 ceramic magnet housing that can pick up a 2.5” nail from 12” off the ground. This allows the Forager XL to collect metal debris effectively while being mounted high enough to avoid ground strikes when operating on larger forklifts in rough terrain.
The Forager XL also features an aluminum Quick Clean Off Sleeve which makes cleaning debris off the magnet easier and protects the magnet housing from impacts while preventing the collected metal debris from pressing the sleeve against the magnet housing making it hard to clean off. Further protection to the magnet is provided by allowing the magnet housing to pivot fore and aft and allowing the magnet to move up in the housing to prevent damage from ground strikes.
$3,019.99 USD
Available in 1 size:
Guardian 33”
Get prices, specs, photos, videos, reviews and more…
The Guardian forklift magnet is a rear pin mount design that increases forklift maneuverability with a super slim profile that wraps around in an arc and hugs the back of the forklift.
This slim profile is specifically designed for forklifts that need to maintain maximum manoeuverability and/or need to work around tight, congested areas.
Easy clean off system by simply pulling up on debris Release Handles. Debris is cleaned off the magnet without bending over.
Designed for permanent mounting.
$2,519.99 – $3,119.99 USD
Available in 4 sizes: 62”, 74”, 86”, 98”
Get prices, specs, photos, videos, reviews and more…
The KHAMSIN hanging magnet was designed for more “off road” applications such as gravel, sand, and dirt roads and yards, or grass covered areas. Ideal for rural roads or gravel roadsides. Ideal for gravel parking lots and driveways.
The KHAMSIN design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
Larger 10” x 3” flat proof bump wheels keep the magnet from hitting the ground or sinking into softer ground surfaces.
The KHAMSIN has a slightly higher minimum sweeping height of 2.5” inches compared to the ISO’s minimum sweeping height of 1.75” inches, in order to operate more effectively in off road applications.
A Quick Clean Off Sleeve comes standard for quick and easy debris removal.
$2,789.99 – $3,459.99 USD
Available in 4 sizes: NYX 62”, NYX 74”, NYX 86”, NYX 98”
Get prices, specs, photos, videos, reviews and more…
The Nyx Heavy Duty Hanging Magnetic Sweeper is built to endure heavy duty terrain while clearing metal debris. An Aluminum quick clean off sleeve protects the magnet housing from impacts and crush forces and allows debris to be removed from the magnetic field quickly and easily.
The Nyx also features 10.5” x 3.25” inch Carlisle flat free wheels with UHMW bushings replacing standard ball bearings for greater impact resistance and smooth operation. These wheels will touch down on terrain changes before the clean off sleeve so the Nyx can glide over obstacles rather than strike the ground.
A 4.5” x 4.5” inch permanently charged C8 magnet housing allows the Nyx to pull a 2.5” inch 8 penny nail from up to 8.25” inches off the ground. So, in the 3”-5” inch recommended sweeping height range the Nyx has plenty of pick up power to retrieve metal debris regardless of terrain requirements. The Nyx attaches easily to many different vehicles using the included chains; making it a versatile and durable tool for clearing debris in rough environments.
$829.99 – $859.99 USD
Available in 4 sizes:Â
NAOS 18”, NAOS 20”, NAOS 22”, NAOS 24”
Get prices, specs, photos, videos, reviews and more…
The NAOS forklift magnet is a rear pin mount design that positions the magnet under the rear counterweight of the forklift to achieve a super low profile and keep forklift maneouverability to a maximum in tight surroundings with little room.
“Swing up” clean of Design allows for easy clean off without getting down and under the forklift. Just unscrew wing nuts and swing the magnet up to waist level to clean it off with a glove or rag over a garbage pail.
Ground strike protection provided by a pivoting magnet and pivoting magnet arms which allow the magnet to swing up and out of the way if the magnet strikes the ground.
Continuous adjustable sweeping height, with no fixed positions, allows precise sweeping height settings to suit your job site.
Comes in 4 sweeping widths, with multiple installation brackets and bracket positions to ensure different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
$529.99 USD
Available in 1 size:Â
Kursk 20
Get prices, specs, photos, videos, reviews and more…
The KURSK forklift magnet is a rear pin mount design whose frame only adds 2.25” inches to the back profile of the forklift. The magnet bar itself is not positioned under the forklift counterweight like the NAOS, but rather hangs straight down from the KURSK frame and therefore will also stick out from the back of the forklift, but the single 20” inch magnet bar width keeps this to a minimum.
Ground strike protection is provided by chains that allow upwards and forward/backward movement which allows the magnet to swing up and out of the way if the magnet strikes the ground or an object.
Adjustable clamping system provides continuous adjustable sweeping height, with no fixed positions, allowing precise sweeping height adjustment to suit your job site and forklift.
Leading edge guard on magnet prevents magnet bar from sticking to your forklift.
Comes in one 20” inch sweeping width, design ensures different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
$4,309.99 USD
Available in 1 size: Oblast 52″
Get prices, specs, photos, videos, reviews and more…
The OBLAST forklift magnet is a fork mount design that allows you to use your forklift to pick up ferrous metal debris and then lift the OBLAST over a disposal / scrap bin for easy removal by using the easy flip down pivoting stainless steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on the rotating stainless steel debris tray for long life and a solid feel.
Ground strike protection is provided by the angled front and rear of the stainless steel debris tray which reduces the width of the bottom flat section and therefore limits magnet contact with the ground, and prevents damage if the magnet does contact the ground because there is no hard edge to “catch” on the ground.
Upward clamping fork pockets provides greater contact of the fork pockets with the forklift forks and therefore provides greater stability to reduce magnet “slippage” on the forks.
Comes in one 52” inch magnet sweeping width, and easily mounts to forklift forks up to and including 6” inch wide forks on 24” inch fork centers. See CAD drawings for further details.
$105.99 USD
Available in 1 size: NOMIC 6”
Get prices, specs, photos, videos, reviews and more…
Build the width you need by attaching them together with easy pin together design.
Designed to be completely concealed under your forklift where it cannot get damaged. The NOMIC easily mounts to the underside of your forklift with rare earth magnet tripods designed to swivel to attach to any metal curved or flat surface.
6 round rare earth pot magnets (3 per tripod), each with 13 lbs of holding force (that’s 78 lbs of total holding force!) are used to hang the 3.5 lb NOMIC to any steel under surface including curved surfaces such as the counterweight on the rear of a forklift.
Easily pin together multiple NOMIC sections to make a magnetic sweeper as large or small as needed making it one of the most versatile magnetic sweepers on the market.
Allows 35 degrees of arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift.
Durable Nylon Construction for severe abrasion resistance and long useful life.
Although small, the NOMIC is not lacking in pickup power. Made with a permanently charged C8 magnet the NOMIC will pick up a 2 ½” nail from 3 ½” off the ground.
Easy height adjustability (with self tightening cord cleat)
$859.99 – $916.99 USD
Available in 2 size: VIGILANT 36” and 42”Â
Get prices, specs, photos, videos, reviews and more…
The Vigilant Forklift Magnetic Sweeper mounts to the bottom of any forklift in minutes and is an easy way to continuously clean metal debris up while the forklift performs its daily tasks. The Vigilant mounts to any flat steel surface using four quad rare earth magnet pods that each have 52lbs of holding force. It comes with a quick clean off sleeve that allows for the collected debris to be removed easily from the magnet without having to bend over or scrape anything from the magnet.
The Vigilant comes in either a 36” or 42” sweeping width which is suitable for most indoor / outdoor forklifts, mounting the magnet in the middle of the forklift also prevents damage since it is tucked away under the forklift and doesn’t extend outside of the wheel width.
The Vigilant magnet housing is built out of anodized aluminum and comes with a PVC clean off sleeve that has wrap around function to hang onto metal debris even if the magnet strikes the ground. The Vigilant magnetic sweeper can pick up a 2.5” nail from a height of 3.25” inches, meaning when it is hung at the recommended 1-2” sweeping height there is plenty of magnetic pickup power.
$1,919.99 – $2,149.99 USD
Available in 2 size: DEFIANT 36” and 42”Â
Get prices, specs, photos, videos, reviews and more…
The Defiant Magnet Mounted Hanging Forklift Magnetic Sweeper mounts to any forklift in minutes with no tools and is the easiest way to utilize permanently charged rare earth magnetic power to continuously clean a job site or facility with no additional labour costs.
Forklifts travel through all high-traffic areas frequently, having a magnet that removes any bolts, nails, staples, banding or wire from these areas ensures less down time from damaged tires on equipment, and less chance of personnel injuries.
Able to pick up a 2.5” 8 penny nail from 4”inches there is plenty of pickup power when operating between 1 and 2 inches. The Defiant hangs between the wheels of the forklift and doesn’t extend out the sides so movement is never impeded.
$10,579.99 USD
Available in 1 size: UPLAND 56”
Get prices, specs, photos, videos, reviews and more…
The UPLAND is a fork mounted magnetic sweeper that can pickup any ferrous debris such as: nails, screws, wire, discarded fabrication material, bolts, nuts, pins, screwdrivers, wrenches, etc. The debris can easily be dumped into a bin using the flip down stainless-steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on all pivot points of the UPLAND ensures a long life for the UPLAND and a solid feel on every motion.
The UPLAND features 10” of vertical suspension travel and 360 degrees of pivot movement rolling on 16.5” flat proof tires. This allows operators to set the UPLAND at a sweeping height of 1 – 4” inches which will be maintained over rough terrain by the ground tracking system.
Upward clamping fork pockets provides greater contact of the fork pockets with the forks and therefore provides greater stability to reduce magnet “slippage”.
Comes in one 56” inch magnet sweeping width, and easily mounts to forks up to and including 5.5” inch wide forks on 22” inch fork centers. See CAD drawings for further details.
The Nova Fork Mounted Magnetic Sweeper is a powerful 74” wide magnet that is built to cover ground quickly and easily with little effort from the forklift operator thanks to the ground tracking system, and remote clean off functions.
The ground tracking system keeps the magnet rolling at your selected sweeping height through rough terrain with 11” of vertical suspension travel and 360 degrees of pivot movement that allows the forklift to travel and turn without being impeded by the Nova as it rolls on 16.5” urethane foam filled tires.
The 6” inch by 8” inch magnet housing will pick up a 2.5” inch 8 penny nail from 12”inches off the ground, giving more than enough pickup power to retrieve most kinds of metal debris at speed including nails, bolts, wrenches, trailer / container seals / locks.
The Nova uses two remote activated 12-volt linear actuators powered by an on-board battery with 450lbs of pressing power each. Once activated from the seat of the forklift via remote control, the actuators press against a 16-gauge stainless steel debris pan which separates the collected debris from the magnet field to easily clean off the magnet into any container or dumpster.
What do the staff of Bluestreak have to say on the subject of manufacturing facilitiy magnets?
The cheapest way to get rid of debris is to avoid extra labor costs and to put a magnet on a vehicle or piece of equipment that is moving about the area all the time while working. Therefore consider the Wrasse or a forklift magnet like the Forager.
Brian - Bluestreak Equipment
Shipping options and charges available at checkout.
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
The maximum lifting height of the Manufacturing Facility Magnets;
For more information on Pickup Power follow this link: “Measuring Pickup Power and Performance in Magnetic Sweepers”
Magnetic Sweepers can be used at manufacturing and industrial facilities to pick up metal debris such as metal shavings, grindings, swarf, blanks from punch press operations, metal debris from equipment parts etc. This type of metal needs to be cleaned up to keep the facilities operating effectively and safely.
The right magnetic sweeper solution is different from facility to facility. For some facilities a small handheld magnetic floor sweeper such as the Powerstik allows for cleanup in and around equipment and for other facilities a larger area needs cleaning and a tow behind model is necessary such as the Caiman or the Aardvark.
The new Forager magnetic sweeper is making waves as a manufacturing solution for picking up metal debris in the yard. This magnet attaches to the forklift rear pin. It moves with the forklift as it goes about the yard and fits like a glove to almost all makes and models of forklifts.
All of our products are designed and manufactured on site at our facilities in Ontario, Canada.
We have manufactured and developed application driven magnetic products since 2005.
Working from rural southern Ontario, our business has grown and now sprawls over several properties using former agricultural buildings.
All products proudly designed and manufactured in Canada
(since 2005).
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All products are stocked for quick shipping and delivery.
English (United States) English (United States) 
French
English (Canada)
Bora