Recommended Industry Applications
- Construction sites
- Farms
- Manufacturing Facilities
- Equine Facilities
- Landfills
- Trucking Terminals
The KHAMSIN hanging magnetic sweeper Quick Deployment system to raise and lower the Khamsin when needed!
Raise and lower easily!
The Khamsin was designed specifically to pick up and remove ferrous metal debris that causes flat tires such as nails, screws, wire, discarded pieces of metal from fabrication activities, bolts, nuts, pins, miscellaneous metal pieces, lost tools, etc.
Use the Khamsin’s actuators to raise and lower the magnet when needed such as between job sites. Allows the magnet to remain mounted and travel on the highway with it up, and then lower when needed to start sweeping for debris. Also allows very fine tuning of sweeper height not possible with just chains alone.
To start using the magnetic sweeper just lower the Khamsin by turning the actuators on each end using a cordless drill so that the bumper wheels are just slightly above the ground.
The Bumper wheels are designed to hang slightly above ground but protect the magnet from hitting the ground when truck suspension compresses, or if there are bumps in the road, or when inclines are encountered. Allows you to hang the magnet lower for better performance than would be possible without bumper wheels.
Permanently charged C8 Ceramic Magnets provide a strong magnetic field with a maximum lifting height of 9” inches using a 2.5” inch nail.
Comes standard with a Quick clean off sleeve which allows quick removal of debris even when mounted under a vehicle. Also comes standard with 6 stabilizing chains.
$2,339.99 USD – $2,889.99 USDBuy Here
See Pricing For All Models Below

Product Pricing

Khamsin™ 62 4 1/2" x 4 1/2" magnetic sweeper
$ 2339.99Shipping
Weight: 251.3 lbs | Length: 64
Width: 13 | Height: 14
SKU:
KM62/4.5

Khamsin™ 74 4 1/2" x 4 1/2" magnetic sweeper
$ 2519.99Shipping
Weight: 288.7 lbs | Length: 76
Width: 13 | Height: 14
SKU:
KM74/4.5

Khamsin™ 86 4 1/2" x 4 1/2" magnetic sweeper
$ 2699.99Shipping
Weight: 327.3 lbs | Length: 88
Width: 13 | Height: 14
SKU:
KM86/4.5

Khamsin™ 98 4 1/2" x 4 1/2" magnetic sweeper
$ 2889.99Shipping
Weight: 365.8 lbs | Length: 100
Width: 13 | Height: 14
SKU:
KM98/4.5
* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.
Specs
Khamsin Series | Khamsin 62 | Khamsin 74 | Khamsin 86 | Khamsin 98 |
---|---|---|---|---|
SKU | KM62/4.5 | KM74/4.5 | KM86/4.5 | KM98/4.5 |
Sweeper Width | 62″ | 74″ | 86″ | 98″ |
Cleaning Method | Quick Clean Off Sleeve | Quick Clean Off Sleeve | Quick Clean Off Sleeve | Quick Clean Off Sleeve |
Sweeping Height Adjustability | Yes, 2.5” minimum, 3” recommended, 5” maximum | Yes, 2.5” minimum, 3” recommended, 5” maximum | Yes, 2.5” minimum, 3” recommended, 5” maximum | Yes, 2.5” minimum, 3” recommended, 5” maximum |
Magnet Type | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 |
Maximum Lifting Height (using a 2.5″ nail) | 9 inches | 9 inches | 9 inches | 9 inches |
Ground Clearance | adjustable, with a minimum of 2.5” inches | adjustable, with a minimum of 2.5” inches | adjustable, with a minimum of 2.5” inches | adjustable, with a minimum of 2.5” inches |
Wheels | 10” x 3” Foam Filled flat proof bump wheels with steel hubs and 5/8” ball bearings rated at 136 kg (300 lbs) capacity each | 10” x 3” Foam Filled flat proof bump wheels with steel hubs and 5/8” ball bearings rated at 136 kg (300 lbs) capacity each | 10” x 3” Foam Filled flat proof bump wheels with steel hubs and 5/8” ball bearings rated at 136 kg (300 lbs) capacity each | 10” x 3” Foam Filled flat proof bump wheels with steel hubs and 5/8” ball bearings rated at 136 kg (300 lbs) capacity each |
Housing Construction | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum |
Maintenance | None | None | None | None |
Included Accessories | Comes standard with 6 stabilizing chains and 14 quick clips | Comes standard with 6 stabilizing chains and 14 quick clips | Comes standard with 6 stabilizing chains and 14 quick clips | Comes standard with 6 stabilizing chains and 14 quick clips |
Total Sweeper Weight | 218.5 lbs | 252.5 lbs | 285.5 lbs | 318.5 lbs |
Total Shipping Weight | 251.3 lbs | 288.7 lbs | 327.3 lbs | 365.8 lbs |
Shipping Dimensions | 64”L x 13”W x 14”H | 76”L x 13”W x 14”H | 88”L x 13”W x 14”H | 100”L x 13”W x 14”H |
Pricing Range | $2339.99 | $2519.99 | $2699.99 | $2889.99 |
CAD Drawings




The KHAMSIN uses permanently charged grade C8 magnets that will never need to be recharged. Power will never decrease, ensuring years of consistent use.

Reviews
5 star | 0% | |
4 star | 0% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Sorry, no reviews match your current selections
Literature
A quick overview of the KHAMSIN’s main features
Easy, Convenient, Durable, Quick Clean Off Sleeve
To clean off the Khamsin magnetic sweeper when full of debris, just remove the Bump Wheel bracket on one end, slide the wheels off and pull off the Quick Clean Off Sleeve. All of the debris will drop off on the side of the magnet that you pull the Sleeve off. Clean off is easy, convenient and simple.
For The Perfect Fit
The Khamsin is available in 4 different sizes!
The KHAMSIN comes in 4 different sweeping widths (magnet bar lengths) of 62”, 74”, 86” and 98” to accommodate many different vehicle sizes. The KHAMSIN can be front, mid or rear mounted on a variety of vehicles as long as enough clearance and space is present. We obviously recommend front mounting a magnet sweeper when at all possible so that you don’t run over the debris with your vehicle before picking it up.
As a hanging magnet, the KHAMSIN has no specific requirements of the vehicle to ensure FIT. You should however take a look at the CAD files showing overall dimensions of width and height to ensure the KHAMSIN will work with your intended vehicle and the anticipated mounting position. The Khamsin has a minimum retracted dimension of 12.37” inches (when raised) and maximum extended dimension of 25.37” inches (when lowered). The depth of the magnet from front to back (front wheel tip to back wheel tip is 10” inches.
Recommended Vehicle Applications
- Graders
- Pickup Trucks
- Tractors
- Commercial Trucks
- Shunt / Yard Trucks
- Telehandlers
Powerful Pickup Performance
The KHAMSIN utilizes permanently charged C8 Ceramic Magnets to provide a strong magnetic field with a maximum lifting height of 9” inches using a two and a half inch nail. Read more about how and why we measure power and performance this way.
The KHAMSIN will pick up a 2 ½” nail when the bottom of the magnet is 9” off the ground providing plenty of pickup power performance when operating on a moving vehicle.
Recommended Sweeping Heights
Sweeping height is adjustable on the KHAMSIN from a minimum of 2.5” inches with the bump wheels touching the ground, to a recommended sweeping height of 3” inches with the bump wheels 1/2” inch off the ground. The maximum suggested sweeping height, only if needed, is 5” inches. Magnet effectiveness will decrease as speed and sweeping height increase which is why we recommend a sweeping height of 3 inches if possible.
Protective Flat proof bump wheels

The KHAMSIN has 10” x 3” Foam Filled flat proof bump wheels with steel hubs and 5/8” ball bearings rated at 100 kg (220 lbs) capacity each
Add Optional hanging bracket accessories to make mounting easy

See how to easily mount a hanging magnet to the front bumper or rear hitch of your truck using our optional hanging magnet brackets.

If you have a 2” inch receiver on either the front or rear of your vehicle you can mount an Khamsin using Hanging Bracket A or B (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of Khamsin you choose), and the 2” inch Receiver Mount Bracket. These accessories are available for purchase and will be recommended accessories when you checkout.

If you have a flat steel bumper as on many commercial trucks as shown in the picture you can mount an Khamsin using Hanging Bracket A or B (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of Khamsin you choose), and Bumper Mount Bracket A

If you have a 2.5” inch receiver on either the front or rear of your vehicle you can mount an Khamsin using Hanging Bracket A or B, the 2” inch Receiver Mount Bracket and the 2.5” to 2” inch Steel Receiver Adaptor Sleeve accessory.
Additional Features
- Packed end to end with permanently charged Grade C8 magnets (unspaced).
- Rugged Durability and construction with 1/8” thick 6061 Aluminum housing that won’t rust if left outside
- Available in 4 different sweeping widths of 5, 6, 7 or 8 feet
- Wrap Around Feature to hold onto debris. The “Wrap Around” magnet design ensures debris never gets wiped off the bottom of the magnet.
- Comes with 6 stabilizing chains and 14 quick links to attach the magnet to your vehicle or equipment.
- Protective bump wheels on each end to make sure the magnet itself does not hit the ground
- Quicker and faster than other methods of picking up metal debris
- Replacement parts and Quick Clean Off Sleeves can be ordered on this website if needed.
Shipping Costs & Methods
Shipping Options
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
International Shipping
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Payment Methods
Made In Canada
All products proudly designed and manufactured in Canada
(since 2005).
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.