Hanging
Hanging magnet designed to be raised or lowered, as needed. With Quick Clean Off Sleeve.
The ISO magnetic sweeper is a hanging magnet design specifically designed for highway maintenance operations.
The ISO design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
High end “bumper wheels” keep the magnet off the ground and multiple mounting points keep this magnet where it should be.
A Quick Clean Off Sleeve makes cleaning debris off the magnet easy!
Get prices, specs, photos, videos, reviews and more...
Easily attach to Your Equipment. Available in a full range of sizes.
The Wrasse magnetic bar is a magnet that is designed for use on "flat terrain". It is extremely versatile because it comes in a full range of magnet housing sizes, magnet of different strengths and magnetic sweeper bar widths from a short 26" to a long 98" width. Housing sizes vary from 2"x5" and 3"x3" to 4.5" x 4.5".
There is a size available to fit almost any size vehicle.
The Wrasse can hang from almost any piece of equipment as long as the ground is fairly even so that they don’t hit the ground all the time. They function very well allowing the equipment operators to clean environments while they do their normal tasks.
There is also an optional Quick Clean Off Sleeve for the Wrasse 3"x 3" and 4.5″ x 4.5″ which makes cleaning debris off the magnet bar easy.
Get prices, specs, photos, videos, reviews and more...
Designed to Take a Hit! Wrapped in A Protective Cage!
The Remoras magnet is an "all terrain" hanging magnet that you can attach to equipment you already use and own. This magnet is specifically designed to withstand frequent ground hits while picking up metal debris from uneven and rough surfaces with potholes and ruts.
A protective cage protects the magnetic housing from hitting the ground when your vehicle travels over uneven, rough terrain.
Magnets of this type are very useful if there are severe ruts in industrial yards caused by constant use over the same path by heavy vehicles, such as is common in precast concrete yards, where concrete pieces are stored outside in rows or aisles and delivered and removed from those aisles by large heavy forklifts.
Get prices, specs, photos, videos, reviews and more...
Easy Clean-Off Side-Shifting Hanging Grader Magnet. Keep Roads Clear and Safe with the Ananke!
The Ananke is a hanging magnet that is loaded with convenience and durability features designed to operate in harsh environments like mines, highways and in military road clearing settings and increase productivity of any grader with rear auxiliary hydraulics. The Ananke can even pick up nails from outside of the grader’s blade width if used with the optional side shift bracket.
C8 magnets allow the Ananke to retrieve 2.5” inch 8 penny nails from up to 10.75” inches, so when used in the recommended 3” inch – 5” inch operating range it can collect any type of metal debris even at speed. When it’s time to clean the magnet, the operator can perform clean-off from the cab of the grader using hydraulic power. If using the side shift bracket you can switch between clean-off and side shift by using the included remote control.
Reduce punctures and increase uptime on all equipment using your roads by having a magnet that works while you do to ensure a safe environment to travel and work.
Get prices, specs, photos, videos, reviews and more...
Designed for Dirt and Gravel Yards. With 10” inch x 3” inch wide flat proof Bumper wheels.
The EIGER was designed for those slightly more off-road surfaces with more uneven surfaces such as dirt and gravel where potholes and bumps exist.
Designed with wide wheels to stay on top of those surfaces, and also designed with a greater minimum sweeping height of 2.5”inches to prevent the sweeper from hitting the ground.
Comes standard with black PVC Quick Clean Off Sleeve for easy debris removal, and 4 hanging chains with 8 quick clips to hang the EIGER from your vehicle.
Get prices, specs, photos, videos, reviews and more...
For extra ground strike protection! With wheeled outriggers and bump wheels.
The AETHER hanging magnet was designed for those off road dirt and gravel situations where more ground strike prevention is needed than the EIGER provides, but less ground strike prevention than the REMORAS provides.
The 10” x 3” flat proof bump wheels on the ends prevent the magnet from hitting the ground and from sinking into loose surfaces, and the wheeled outriggers provide additional ground strike prevention in the middle of the magnet’s overall length.
Maximum lifting height of 9” inches (using a 2 ½ inch nail). Measuring Magnetic Sweeper pickup power and performance.
Comes standard with a black PVC Quick Clean Off Sleeve for quick and easy debris removal. Also includes 6 stabilizing chains with 12 quick clips to the AETHER from your vehicle.
Get prices, specs, photos, videos, reviews and more...
For Flat terrain! With bump wheels for some added protection.
The PYR hanging magnet was designed for flat terrain and “on road” type uses where not much ground strike prevention is needed. “On road” type bump wheels are provided on the ends to eliminate magnet strikes due to occasional potholes and speed bump type obstacles.
Choose from 2 different models with different magnet strengths, and 6 different magnet lengths from 3 to 8 feet, to get the perfect setup for your application.
Maximum lifting height of 6” inches (using a 2 ½ inch nail) for the PYR 3”x3” model, and 9 ¼” inches for the PYR 4.5”x4.5” model. Measuring Magnetic Sweeper pickup power and performance.
Also includes 4 stabilizing chains with 8 quick clips to hang the PYR from your vehicle.
Standard debris clean off method is to wipe the magnet clean with a glove or rag. However a black PVC Quick Clean Off Sleeve accessory may be purchased separately for quick and easy debris removal.
Get prices, specs, photos, videos, reviews and more...
Off Road Hanging Magnet Designed to be raised or lowered, as needed.
The KHAMSIN hanging magnet was designed for more “off road” applications such as gravel, sand, and dirt roads and yards, or grass covered areas. Ideal for rural roads or gravel roadsides. Ideal for gravel parking lots and driveways.
The Khamsin design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
Larger 10” x 3” flat proof bump wheels keep the magnet from hitting the ground or sinking into softer ground surfaces.
The Khamsin has a slightly higher minimum sweeping height of 2.5” inches compared to the ISO’s minimum sweeping height of 1.75” inches, in order to operate more effectively in off road applications.
A Quick Clean Off Sleeve comes standard for quick and easy debris removal.
Get prices, specs, photos, videos, reviews and more...
Simple, Basic, Strong.
An economical choice for a magnet that can pick up from greater heights.
The GOBIE hanging magnet was designed to be strong yet economical.
The two 4.5”x4.5” housings placed side by side create a magnet that can “reach” further downward, able to pickup debris from greater heights.
Maximum lifting height of 11” inches (using a 2 ½ inch nail). Gauss measurements are also provided at different distances for this magnet. Measuring Magnetic Sweeper pickup power and performance
The Gobie can hang from almost any piece of equipment as long as it doesn’t hit the ground all the time.
Comes in 15 different sizes (widths) from 14” inches to 98” inches, in 6” inch increments.
Includes 4 hanging chains with 8 quick clips to hang the GOBIE.
Get prices, specs, photos, videos, reviews and more…..
Get prices, specs, photos, videos, reviews and more...
Remote controlled height adjustment without leaving the cab of your vehicle!
With outdoor rated IP65 12-volt DC actuators rated at 562 lbs each and 7.5” inches of up and down movement for remote controlled raising and lowering of magnet from raised travelling to lowered sweeping position.
The ALPHA is the same as the AETHER magnetic sweeper but with the addition of the remote-controlled electric actuators for up and down movement.
Like the AETHER the ALPHA was designed for those off-road dirt and gravel situations where more ground strike prevention is needed.
The 10” x 3” flat proof bump wheels on the ends prevent the magnet from hitting the ground and from sinking into loose surfaces, and the wheeled outriggers provide additional ground strike prevention in the middle of the magnet’s overall length.
Maximum lifting height of 9” inches (using a 2 ½ inch nail).See Gauss strength measurements at various sweeping height distances also available.
Comes standard with a black PVC Quick Clean Off Sleeve for quick and easy debris removal.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Aluminum Sleeve Hanging Magnetic Sweeper
$2,589.99 – $3,189.99 USD
(all prices in USD)
Â
Available in 4 sizes: NYX 62”, NYX 74”, NYX 86”, NYX 98”
The Nyx Heavy Duty Hanging Magnetic Sweeper is built to endure heavy duty terrain while clearing metal debris. An Aluminum quick clean off sleeve protects the magnet housing from impacts and crush forces and allows debris to be removed from the magnetic field quickly and easily.
The Nyx also features 10.5” x 3.25” inch Carlisle flat free wheels with UHMW bushings replacing standard ball bearings for greater impact resistance and smooth operation. These wheels will touch down on terrain changes before the clean off sleeve so the Nyx can glide over obstacles rather than strike the ground.
A 4.5” x 4.5” inch permanently charged C8 magnet housing allows the Nyx to pull a 2.5” inch 8 penny nail from up to 8.25” inches off the ground. So, in the 3”-5” inch recommended sweeping height range the Nyx has plenty of pick up power to retrieve metal debris regardless of terrain requirements. The Nyx attaches easily to many different vehicles using the included chains; making it a versatile and durable tool for clearing debris in rough environments.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Offroad Hanging Magnet with onboard out-riggers and aluminum sleeve
$3,659.99 – $4,269.99 USD
(all prices in USD)
Â
Available in 4 sizes: Erebus 62”, 74”, 86”, 98”
The Erebus Heavy Duty Offroad Hanging Magnet is built to clean metal from the toughest job sites, the onboard out-riggers and aluminum sleeve protect the magnet housing from ground strikes and scrapes. The Erebus also has 10.5 “ x 3.25” Carlisle flat free bump wheels that allow the magnet to roll over changing terrain rather than hit the aluminum clean off sleeve off the ground. The wheel bearings have been replaced with custom 5/8” UHMW bushings that can withstand greater impacts and roll smoothly.
From recycling centers to highway maintenance, the Erebus is a heavy duty durable magnet with exceptional pickup power. It can pick up a 2.5” 8 penny nail from 8.25” off the ground, so in the recommended sweeping height range of 3-5” there is plenty of power available to collect metal debris. The aluminum clean off sleeve resists crush forces that normally make clean off sleeves difficult to remove and slides easily on PVC rails inside the aluminum sleeve that prevent friction.
The Erebus can be easily mounted on a Bluestreak Equipment hanging bracket or by using the included chains with quick links. A hanging magnet mounts easily on a variety of vehicles and is a versatile tool for keeping job sites clean and safe for personnel and equipment.
Get prices, specs, photos, videos, reviews and more...
Magnet Mounted Forklift Magnet.
Build the width you need by attaching them together with easy pin together design.
Designed to be completely concealed under your forklift where it cannot get damaged. The NOMIC easily mounts to the underside of your forklift with rare earth magnet tripods designed to swivel to attach to any metal curved or flat surface.
6 round rare earth pot magnets (3 per tripod), each with 13 lbs of holding force (that’s 78 lbs of total holding force!) are used to hang the 3.5 lb NOMIC to any steel under surface including curved surfaces such as the counterweight on the rear of a forklift.
Easily pin together multiple NOMIC sections to make a magnetic sweeper as large or small as needed making it one of the most versatile magnetic sweepers on the market.
Allows 35 degrees of arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift.
Durable Nylon Construction for severe abrasion resistance and long useful life.
Although small, the NOMIC is not lacking in pickup power. Made with a permanently charged C8 magnet the NOMIC will pick up a 2 ½” nail from 3 ½” off the ground.
Easy height adjustability (with self tightening cord cleat)
Get prices, specs, photos, videos, reviews and more...
Mounts to Any Forklift In Minutes Using Rare Earth Magnets!
The Vigilant Forklift Magnetic Sweeper mounts to the bottom of any forklift in minutes and is an easy way to continuously clean metal debris up while the forklift performs its daily tasks. The Vigilant mounts to any flat steel surface using four quad rare earth magnet pods that each have 52lbs of holding force. It comes with a quick clean off sleeve that allows for the collected debris to be removed easily from the magnet without having to bend over or scrape anything from the magnet.
The Vigilant comes in either a 36” or 42” sweeping width which is suitable for most indoor / outdoor forklifts, mounting the magnet in the middle of the forklift also prevents damage since it is tucked away under the forklift and doesn’t extend outside of the wheel width.
The Vigilant magnet housing is built out of anodized aluminum and comes with a PVC clean off sleeve that has wrap around function to hang onto metal debris even if the magnet strikes the ground. The Vigilant magnetic sweeper can pick up a 2.5” nail from a height of 3.25” inches, meaning when it is hung at the recommended 1-2” sweeping height there is plenty of magnetic pickup power.
Get prices, specs, photos, videos, reviews and more...
Rare Earth Powered Magnetic Cleaning, Attaches in Minutes to Any Metal Surface
The Defiant Magnet Mounted Hanging Forklift Magnetic Sweeper mounts to any forklift in minutes with no tools and is the easiest way to utilize permanently charged rare earth magnetic power to continuously clean a job site or facility with no additional labour costs.
Forklifts travel through all high-traffic areas frequently, having a magnet that removes any bolts, nails, staples, banding or wire from these areas ensures less down time from damaged tires on equipment, and less chance of personnel injuries.
Able to pick up a 2.5” 8 penny nail from 4”inches there is plenty of pickup power when operating between 1 and 2 inches. The Defiant hangs between the wheels of the forklift and doesn’t extend out the sides so movement is never impeded.
Get prices, specs, photos, videos, reviews and more...
Shipping Costs & Methods
Shipping Options
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
International Shipping
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Payment Methods
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
Â
Quick Tips
What do the staff of Bluestreak have to say about Hanging magnets?
Only choose the Remoras if you think that a hanging magnet like the Wrasse would hit the ground all the time because of bumps, ruts, potholes, etc. That’s the only reason for selecting the Remoras, because the Remoras magnet is the same magnet as the strongest Wrasse magnet (the 4.5x4.5 series).
Mike - Bluestreak Equipment
Shipping Costs & Methods
Shipping Options
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
International Shipping
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Payment Methods
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
Â
Know what you need for your next project?
The maximum lifting height of the Hanging Magnet Models are as follows;
Wrasse 2"x 5" | 4 and 3/4 inches
Wrasse 3"x 3" |6 inches
Wrasse 4.5"x 4.5" | 8 and 1/2 inches
Remoras | 8 and 1/2 inches
Ananke | 10 and 3/4 inches
ISO | 9 inches
Eiger | 9 and 1/4 inches
Aether | 9 inches
PYR 3" x 3" | 6 inches
PYR 4.5" x 4.5" | 9 and 1/4 inches
Khamsin | 9 inches
Gobie | 11 inches
Alpha | 9 inches
Nyx | 8 and 1/4 inches
Erebus | 8 and 1/4 inches
Nomic | 3 and 1/2 inches
Vigilant | 3 and 1/4 inches
Defiant | 4 inches
For more information on Pickup Power follow this link: “Measuring Pickup Power and Performance in Magnetic Sweepers”
Pyr 4.5"x4.5"Why a hanging magnet is a really good deal.
Hanging magnets give you a lot of benefits for your dollar.
When buying a magnetic sweeper bar you are only paying for a big magnet... no wheels, handles, or frame are part of the design or cost. As a result they are simply a great value for what you get, which is essentially just a big magnet.
Once you hang them on a vehicle of any type they work continuously, while you go about your other duties.
When you attach a magnetic sweeper bar to your equipment, you don’t have to spend extra labor time and money just sweeping for metal debris. You can hang them from almost anything, you just have to look at the equipment for the best place to hang them, and in most cases a place can be found to simply attach the magnet using the chains provided, at worst you simply have to make a simple metal bracket to get the optimal positioning.
How much pickup power do your magnetic sweeper bars have?
If you're wondering about pickup power, Bluestreak measures pickup power in terms of the “maximum lifting height using a two and a half inch nail”.
Everyone knows what a two and a half inch nail looks like. This measure indicates the maximum height that the sweeper can pick up a two and a half inch nail from in a bench test. This is the best indication of performance and pickup power that is easy to understand.
Below are the maximum lifting height measurements of the Hanging Magnet Models.
Consider what surface you will be working on.
When choosing a hanging magnet consider the terrain you will be working on because the terrain you will be working on greatly effects the magnets' performance.
We have designed the Wrasse magnetic bar to work well on flat surfaces and the Remoras magnet to work well in more "all terrain" environments where there might be pot holes or ruts and where the magnet could be frequently hitting the ground.
If you know you will be working mainly on concrete or relatively flat terrain then choose a model within the Wrasse Series that is designed for flat surfaces.
If you are going to be attaching your magnet to vehicles where the terrain is rough and the magnet may hit the ground, then choose a model within the Remoras Series.
Add Optional hanging bracket accessories to make mounting easy
If you have a 2” inch receiver on either the front or rear of your vehicle you can mount a hanging magnet using one of our Hanging Brackets (A, B or C), and our 2” inch Receiver Mount Bracket. The selection of which Hanging Bracket to use (A, B or C) is dependent on the hanging magnet you chose. Both accessories are available for purchase and will be recommended accessories when you checkout.
If you have a flat steel bumper as on many commercial trucks as shown in the picture to the left you can mount a hanging magnet using one of our Hanging Brackets (A, B or C), and our Bumper Mount Bracket A.
If you have a 2.5” inch receiver on either the front or rear of your vehicle you can mount a hanging magnet using one of our Hanging Brackets (A, B or C), and our 2” inch Receiver Mount Bracket and our 2.5” to 2” inch Steel Receiver Adaptor Sleeve accessory.
Check out our Hanging Bracket Selection Chart and FIT Guidelines
Manufacturing In-House
All of our products are designed and manufactured on site at our facilities in Ontario, Canada.
Application-Driven Design
We have manufactured and developed application driven magnetic products since 2005.
Working from Rural Roots
Working from rural southern Ontario, our business has grown and now sprawls over several properties using former agricultural buildings.
Made In Canada
All products proudly designed and manufactured in Canada
(since 2005).
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.
