Forklift Magnetic
Types of Forklift Magnetic Sweepers
There are three types of Forklift Mangets available, differentiated by their mounting location.
Rear-Mounted
Rear mounted to the back of the forklift using the rear forklift Pin as the mount location. This type of forklift magnet is meant to be permanently mounted allowing use while the forklift is performing normal duties.
Fork-Mounted
Fork Mount magnets slide on and off the forks of the forklift. This type of forklift magnet is only mounted temporarily on the forks when the need arises and you can’t use the forklift for anything else when using it as a magnetic sweeper.
Hanging
Hanging (Mid Mount) Forklift magnets are hung underneath the forklift between the front and rear wheels. This type of forklift magnet is also meant to be permanently mounted.
A Rear Pin Mount Magnet Designed for Maximum Flexibility
The Forager Magnetic Sweeper is designed to fit almost every brand and size of forklift on the market right out of the box.
The Forager utilizes the rear pin on your forklift as the mounting point and the Forager mounting bracket is vented to ensure the pin mount can be used even if the exhaust on your forklift is vented through the pin slot.
No modifications to your forklift are necessary to mount the Forager. The mounting bracket uses the existing pin on your forklift ONLY. There is no need to modify, weld on or drill into your forklift in order to mount the Forager.
The Forager can be mounted to forklifts of varying sizes. The multiple installation bracket positions combined with the adjustable sweeping height ensures different height forklifts of every kind are accommodated.
The Forager was designed specifically to pickup and remove debris such as nails, screws, wire, discarded pieces from fabrication activities, bolts, nuts, pins, screw drivers, wrenches, etc. while operating the forklift.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Forklift Magnet for Harsh Conditions
The Forager XL is a bigger version of the popular Forager magnetic sweeper that used to be the largest rear mounted forklift magnet available on the market. It can adjust to fit almost any forklift on the market right out of the box. The Forager XL steel mounting bracket attaches to the rear pin of a forklift and is vented to allow for exhaust gases to flow freely even if it is routed through the rear pin port. This bracket hugs the counterweight on the forklift and allows the Forager XL to mount on most forklift rear pins.
The Forager XL Heavy Duty Rear Mounted Forklift Magnet comes in 3 sweeping widths and features a 7x7” permanently charged C8 ceramic magnet housing that can pick up a 2.5” nail from 12” off the ground. This allows the Forager XL to collect metal debris effectively while being mounted high enough to avoid ground strikes when operating on larger forklifts in rough terrain.
The Forager XL also features an aluminum Quick Clean Off Sleeve which makes cleaning debris off the magnet easier and protects the magnet housing from impacts while preventing the collected metal debris from pressing the sleeve against the magnet housing making it hard to clean off. Further protection to the magnet is provided by allowing the magnet housing to pivot fore and aft and allowing the magnet to move up in the housing to prevent damage from ground strikes.
Get prices, specs, photos, videos, reviews and more...
Rear Pin Mount Design That Hugs the Forklift
The Guardian forklift magnet is a rear pin mount design that increases forklift maneuverability with a super slim profile that wraps around in an arc and hugs the back of the forklift.
This slim profile is specifically designed for forklifts that need to maintain maximum manoeuverability and/or need to work around tight, congested areas.
Easy clean off system by simply pulling up on debris Release Handles. Debris is cleaned off the magnet without bending over.
Designed for permanent mounting.
Get prices, specs, photos, videos, reviews and more...
Hanging Forklift Magnetic Sweeper Designed to Take a Hit!
The Remoras magnetic sweeper is a mid mount design for larger outdoor forklifts that specializes in handling rough outdoor uneven or pot hole filled conditions. Designed for permanent mounting.
Get prices, specs, photos, videos, reviews and more...
Fork Mounted Forklift Magnet With Debris Digging Rake!
The Bluetang magnetic sweeper is a fork mounted design for all forklift sizes designed for temporary mounting and use in dirt and gravel conditions where debris is embedded and surfaces can benefit from continued grooming to reduce pot holes and bumps.
Get prices, specs, photos, videos, reviews and more...
Hanging magnet made for large outdoor forklifts operating in dirt and gravel yards.
The EIGER was designed for those slightly more off-road surfaces with more uneven surfaces such as dirt and gravel where potholes and bumps exist. Designed with wide wheels to stay on top of those surfaces, and also designed with a greater minimum sweeping height of 2.5" inches to prevent the sweeper from hitting the ground.
Comes standard with black PVC Quick Off Sleeve for easy debris removal, and 4 hanging chains with 8 quick clips to hang the EIGER from your vehicle.
Get prices, specs, photos, videos, reviews and more...
For extra ground strike protection! With wheeled outriggers and bump wheels.
The AETHER magnet was designed for those dirt and gravel industrial and commercial lots that big Outdoor forklifts many times work in. If you have metal debris and rough yards and roads where more ground strike prevention is needed to protect the magnet than the EIGER provides, but less ground strike prevention than the REMORAS provides, the AETHER may just be the ticket.
The 10” x 3” flat proof bump wheels on the ends prevent the magnet from hitting the ground and from sinking into loose surfaces, and the wheeled outriggers provide additional ground strike prevention in the middle of the magnet’s overall length.
Maximum lifting height of 9” inches (using a 2 ½ inch nail). Measuring Magnetic Sweeper pickup power and performance.
Comes standard with a black PVC Quick Clean Off Sleeve for quick and easy debris removal. Also includes 6 stabilizing chains with 12 quick clips to the AETHER from your vehicle.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Aluminum Sleeve Hanging Magnetic Sweeper
$2,589.99 – $3,189.99 USD
(all prices in USD)
Available in 4 sizes: NYX 62”, NYX 74”, NYX 86”, NYX 98”
The Nyx Heavy Duty Hanging Magnetic Sweeper is built to endure heavy duty terrain while clearing metal debris. An Aluminum quick clean off sleeve protects the magnet housing from impacts and crush forces and allows debris to be removed from the magnetic field quickly and easily.
The Nyx also features 10.5” x 3.25” inch Carlisle flat free wheels with UHMW bushings replacing standard ball bearings for greater impact resistance and smooth operation. These wheels will touch down on terrain changes before the clean off sleeve so the Nyx can glide over obstacles rather than strike the ground.
A 4.5” x 4.5” inch permanently charged C8 magnet housing allows the Nyx to pull a 2.5” inch 8 penny nail from up to 8.25” inches off the ground. So, in the 3”-5” inch recommended sweeping height range the Nyx has plenty of pick up power to retrieve metal debris regardless of terrain requirements. The Nyx attaches easily to many different vehicles using the included chains; making it a versatile and durable tool for clearing debris in rough environments.
Get prices, specs, photos, videos, reviews and more...
Tucks under forklift for super low profile! Adds only 1.75” inches to rear profile of the forklift
The NAOS forklift magnet is a rear pin mount design that positions the magnet under the rear counterweight of the forklift to achieve a super low profile and keep forklift maneouverability to a maximum in tight surroundings with little room.
“Swing up” clean of Design allows for easy clean off without getting down and under the forklift. Just unscrew wing nuts and swing the magnet up to waist level to clean it off with a glove or rag over a garbage pail.
Ground strike protection provided by a pivoting magnet and pivoting magnet arms which allow the magnet to swing up and out of the way if the magnet strikes the ground.
Continuous adjustable sweeping height, with no fixed positions, allows precise sweeping height settings to suit your job site.
Comes in 4 sweeping widths, with multiple installation brackets and bracket positions to ensure different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
Get prices, specs, photos, videos, reviews and more...
Economical rear pin mount Forklift magnet. Simple design in one size.
The KURSK forklift magnet is a rear pin mount design whose frame only adds 2.25” inches to the back profile of the forklift. The magnet bar itself is not positioned under the forklift counterweight like the NAOS, but rather hangs straight down from the KURSK frame and therefore will also stick out from the back of the forklift, but the single 20” inch magnet bar width keeps this to a minimum.
Ground strike protection is provided by chains that allow upwards and forward/backward movement which allows the magnet to swing up and out of the way if the magnet strikes the ground or an object.
Adjustable clamping system provides continuous adjustable sweeping height, with no fixed positions, allowing precise sweeping height adjustment to suit your job site and forklift.
Leading edge guard on magnet prevents magnet bar from sticking to your forklift.
Comes in one 20” inch sweeping width, design ensures different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Fork Mounted Magnet! With pivoting debris tray for easy debris removal.
The OBLAST forklift magnet is a fork mount design that allows you to use your forklift to pick up ferrous metal debris and then lift the OBLAST over a disposal / scrap bin for easy removal by using the easy flip down pivoting stainless steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on the rotating stainless steel debris tray for long life and a solid feel.
Ground strike protection is provided by the angled front and rear of the stainless steel debris tray which reduces the width of the bottom flat section and therefore limits magnet contact with the ground, and prevents damage if the magnet does contact the ground because there is no hard edge to “catch” on the ground.
Upward clamping fork pockets provides greater contact of the fork pockets with the forklift forks and therefore provides greater stability to reduce magnet “slippage” on the forks.
Comes in one 52” inch magnet sweeping width, and easily mounts to forklift forks up to and including 6” inch wide forks on 24” inch fork centers. See CAD drawings for further details.
Get prices, specs, photos, videos, reviews and more...
Magnet mounted forklift magnet, easily attaches to any ferrous surface.
Designed to be completely concealed under your forklift where it cannot get damaged. The NOMIC easily mounts to the underside of your forklift with rare earth magnet tripods designed to swivel to attach to any metal curved or flat surface.
6 round rare earth pot magnets (3 per tripod), each with 13 lbs of holding force (that’s 78 lbs of total holding force!) are used to hang the 3.5 lb NOMIC to any steel under surface including curved surfaces such as the counterweight on the rear of a forklift.
Easily pin together multiple NOMIC sections to make a magnetic sweeper as large or small as needed making it one of the most versatile magnetic sweepers on the market.
Allows 35 degrees of arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift.
Durable Nylon Construction for severe abrasion resistance and long useful life.
Although small, the NOMIC is not lacking in pickup power. Made with a permanently charged C8 magnet the NOMIC will pick up a 2 ½” nail from 3 ½” off the ground.
Easy height adjustability (with self tightening cord cleat)
Get prices, specs, photos, videos, reviews and more...
Mounts to Any Forklift In Minutes Using Rare Earth Magnets!
The Vigilant Forklift Magnetic Sweeper mounts to the bottom of any forklift in minutes and is an easy way to continuously clean metal debris up while the forklift performs its daily tasks. The Vigilant mounts to any flat steel surface using four quad rare earth magnet pods that each have 52lbs of holding force. It comes with a quick clean off sleeve that allows for the collected debris to be removed easily from the magnet without having to bend over or scrape anything from the magnet.
The Vigilant comes in either a 36” or 42” sweeping width which is suitable for most indoor / outdoor forklifts, mounting the magnet in the middle of the forklift also prevents damage since it is tucked away under the forklift and doesn’t extend outside of the wheel width.
The Vigilant magnet housing is built out of anodized aluminum and comes with a PVC clean off sleeve that has wrap around function to hang onto metal debris even if the magnet strikes the ground. The Vigilant magnetic sweeper can pick up a 2.5” nail from a height of 3.25” inches, meaning when it is hung at the recommended 1-2” sweeping height there is plenty of magnetic pickup power.
Get prices, specs, photos, videos, reviews and more...
Rare Earth Powered Magnetic Cleaning, Attaches in Minutes to Any Metal Surface
The Defiant Magnet Mounted Hanging Forklift Magnetic Sweeper mounts to any forklift in minutes with no tools and is the easiest way to utilize permanently charged rare earth magnetic power to continuously clean a job site or facility with no additional labour costs.
Forklifts travel through all high-traffic areas frequently, having a magnet that removes any bolts, nails, staples, banding or wire from these areas ensures less down time from damaged tires on equipment, and less chance of personnel injuries.
Able to pick up a 2.5” 8 penny nail from 4”inches there is plenty of pickup power when operating between 1 and 2 inches. The Defiant hangs between the wheels of the forklift and doesn’t extend out the sides so movement is never impeded.
Get prices, specs, photos, videos, reviews and more...
Rough Terrain Heavy Duty Fork Mounted Magnet! With ground tracking four link suspension.
The UPLAND is a fork mounted magnetic sweeper that can pickup any ferrous debris such as: nails, screws, wire, discarded fabrication material, bolts, nuts, pins, screwdrivers, wrenches, etc. The debris can easily be dumped into a bin using the flip down stainless-steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on all pivot points of the UPLAND ensures a long life for the UPLAND and a solid feel on every motion.
The UPLAND features 10” of vertical suspension travel and 360 degrees of pivot movement rolling on 16.5” flat proof tires. This allows operators to set the UPLAND at a sweeping height of 1 – 4” inches which will be maintained over rough terrain by the ground tracking system.
Upward clamping fork pockets provides greater contact of the fork pockets with the forks and therefore provides greater stability to reduce magnet “slippage”.
Comes in one 56” inch magnet sweeping width, and easily mounts to forks up to and including 5.5” inch wide forks on 22” inch fork centers. See CAD drawings for further details.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Fork Mounted Magnetic Sweeper with Remote Clean Off and Ground Tracking Suspension System
The Nova Fork Mounted Magnetic Sweeper is a powerful 74” wide magnet that is built to cover ground quickly and easily with little effort from the forklift operator thanks to the ground tracking system, and remote clean off functions.
The ground tracking system keeps the magnet rolling at your selected sweeping height through rough terrain with 11” of vertical suspension travel and 360 degrees of pivot movement that allows the forklift to travel and turn without being impeded by the Nova as it rolls on 16.5” urethane foam filled tires.
The 6” inch by 8” inch magnet housing will pick up a 2.5” inch 8 penny nail from 12”inches off the ground, giving more than enough pickup power to retrieve most kinds of metal debris at speed including nails, bolts, wrenches, trailer / container seals / locks.
The Nova uses two remote activated 12-volt linear actuators powered by an on-board battery with 450lbs of pressing power each. Once activated from the seat of the forklift via remote control, the actuators press against a 16-gauge stainless steel debris pan which separates the collected debris from the magnet field to easily clean off the magnet into any container or dumpster.
Get prices, specs, photos, videos, reviews and more...
Quick Tips
What do staff of Bluestreak have to say about Rear Mount Magnets?
Take a real close look at the FIT guidelines of rear mount magnets. We try and make them fit a wide array of forklifts, but they may not fit every single one. Look at our FIT guidelines for the specific product you’re interested in and check your forklift against those FIT criteria.
Brian - Bluestreak Equipment
What do the staff of Bluestreak have to say on the subject of Forklift magnets?
My recommendation is to select a magnetic sweeper that you can leave mounted all the time if at all possible so that it works for you all the time.
Karren - Bluestreak Equipment
Previous
Next
Shipping Costs & Methods
Shipping Options
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
International Shipping
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Payment Methods
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
Know what you need for your next project?
7 Questions to Ask Before Buying a Forklift Magnetic Sweeper
Will the magnetic sweeper be mounted to the forklift permanently or will it be temporary?
If you can mount a magnet permanently on your forklift it’s going to working for you all the time at no extra labor cost, and it will also save you the time of temporary mounting and de-mounting. Fork mounted sweepers have the drawback that they don’t allow you to keep the magnet permanently mounted because you need to use the forklift. Therefore if you can make it work, a rear or mid mount forklift magnet is always better.
Will the maneuverability of our forklift be affected by the magnetic sweeper?
You need to consider the effect of any permanently mounted forklift magnet on overall forklift maneuverability at your location. Rear mount forklift magnets extend the overall length of the forklift to some degree, some are straight, some wrap around the back of the forklift better, but each can affect at least to some degree your forklift maneuverability. If you don’t have a lot of space to move your forklift around, then a mid mount forklift magnet is going to rank higher for you. If you’ve all kinds of space, maneuverability isn’t a concern.
How well does the magnetic sweeper fit your particular forklift?
You need to consider what magnets will fit your forklift. Not every magnet fits every forklift. Some forklifts are low and can only accept some mid mount magnets. Rear mount magnets have specific fit guidelines that need to be checked to ensure they will fit your specific forklift.
How far off the ground will the forklift magnetic sweeper be positioned?
We want to make sure our products meet your expectations. Therefore make sure you take a look at our “maximum lifting height” specification. We bench test every one of our magnetic sweeper models to determine their maximum lifting height of a two and a half inch standard nail. Everyone knows what a two and a half inch nail looks like which is why we use this standard measure of magnet strength and it will give you a very good idea of magnet performance. Many times we have videos of our products picking up various other materials so take a look at the videos in the video galleries. They give you a chance to “kick the tires” and see how the products perform. Many of these videos have been submitted by previous customers. Make sure the magnet strength matches the type of debris you expect to be picking up.
What terrain and in what conditions will you be working in?
The rougher, dirtier terrain your forklift operates in the stronger the magnet your likely going to want, because the magnet will have to be set higher to avoid constantly hitting the ground. The magnet will also need to pick up debris through some dirt therefore you need a stronger magnet. The rougher the terrain that exists because of things like bumps and pot holes, more you will want or favor a magnet that has some protection built in to the design to either deal with the abuse of hitting the ground or being able to move out of the way when it does hit the ground in order to prevent damage.
How easy is the forklift magnetic sweeper to clean off?
A magnetic sweeper may work really well at picking up debris, but how easy is it to clean off? Think through how you would clean the magnet off step by step. Make sure it makes sense to you and your situation. We try and do this for you so that clean off isn’t ridiculous, but some manufacturers don’t. Pay attention to the details of how this will work right to the point of getting the debris in the garbage or scrap bin.
How good is the forklift magnet at hanging on to the debris that it picks up?
You are not going to be cleaning your magnet off constantly, so it’s important that when your magnet does pick up a nail or screw that the magnet secures the debris so that it won’t fall off if the magnet is suddenly shaken because of a bump or if the bottom of the magnet hits the ground and the debris is wiped backward on the magnet. The last thing you want is for the debris to fall off again. Make sure your magnet has some feature like our “Wrap Around Feature”, it not only makes sure debris doesn’t get wiped off the bottom of the magnet, it makes the debris holding capacity higher and you’ll find in practice that most of your debris ends up on the side of your magnet not the bottom of it. And that’s a good indication to you why we have this feature.
These are the maximum lifting heights of Forklift Magnets.
Forager | 8 and 1/2 inches
Forager XL | 12 inches
Guardian | 7 and 1/4 inches
Remoras | 8 and 1/2 inches
Bluetang | 8 and 1/2 inches
Eiger | 9 and 1/4 inches
Aether | 9 inches
Nyx | 8 and 1/4 inches
NAOS | 4 and 1/4 inches
Kursk | 4 and 1/4 inches
Oblast | 10 and 1/2 inches
Nomic | 3 and 1/2 inches
Vigilant | 3 and 1/4 inches
Defiant | 4 inches
Upland | 10 and 3/4 inches
Nova | 12 inches
Forager
BluetangDo you need a forklift magnetic sweeper?
There are over two billion pallets in the USA alone. Broken pallets lose the nails that hold them together and leave behind nails and wrapper staples that cause flat tires but can easily be cleaned up with a forklift fitted with a forklift magnet.
Forklifts also move things around, and in the process of moving things around, pieces of metal fall off trucks, pallets and the material being moved.
Forklifts are mobile in the same area and therefore capable of sweeping up the debris while carrying out normal operations at no additional labor cost
Forklift magnets pay for themselves quickly by preventing flat tires and downtime of equipment, and repair costs.
Made In Canada
All products proudly designed and manufactured in Canada
(since 2005).
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.
