This product may be covered by one or more trade secrets, and pending or issued patents and trademarks. For a listing of our registered intellectual property, See Bluestreak Patent Information..
Designed to be completely concealed under your forklift where it cannot get damaged. The NOMIC Quick Attach Magnetic Sweeper easily mounts to the underside of your forklift with rare earth magnet tripods designed to swivel to attach to any metal curved or flat surface.
6 round rare earth pot magnets (3 per tripod), each with 13 lbs of holding force (that’s 78 lbs of total holding force!) are used to hang the 3.5 lb NOMIC to any steel under surface including curved surfaces such as the counterweight on the rear of a forklift.
Easily pin together multiple NOMIC sections to make a magnetic sweeper as large or small as needed making it one of the most versatile magnetic sweepers on the market.
Allows 35 degrees of arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift.
The Nomic is sold in individual 6” inch pieces but can connect using an easy pin together design. Although the Nomic is small, it still has great pick-up power allowing an operator to pick up a 2 ½” nail from 3 1/2 “off the ground.
$105.99
See Pricing For All Models Below

$105.99
| Nomic Series | Nomic |
|---|---|
| SKU | NO6 |
| Total Sweeper Weight | 3.5 lbs |
| Sweeper Width | 6″ |
| Sweeping Height Adjustability | Yes, recommended 1” to 2” maximum |
| Sweeper Wheel Type | None |
| Cleaning Method | Wipe clean with glove or rag |
| Terrain Surface | Flat Surfaces |
| Pricing Range | $$105.99 |
A: 0.125” (3mm) cord (rated at 100+ lbs)
B: Connection pin for using multiple units together
C: Rigid bolted design
D: Design allows attachment to curved surfaces.
E: Self-Tightening cord cleat
F: 6x 13lb capacity rubber coated rare earth pot magnets.
G: 0.125” (1/8”) Thick nylon housing
Nomic Dimensions Front View
Nomic Dimensions End View
Nomic Dimensions Top View
A: 35 degrees
A: 3 units
B: 2 units
C: 1 unit
D: Dimension (inches)
Nomic Gauss Measurements
A: A = Distance from Magnet (Sweeping Height)
Note: Gauss (G) shown as the peak gauss measured in the center of the magnet at each distance.
Sorry, no reviews match your current selections
There are no parts.
There are no accessories.
This is the Nomic by Blue Streak Equipment.
It’s available in individual sections.
Here we’ve got three sections attached to each other on the back of this forklift.
Each section connects to the other with a pin, and that pin also allows it to be pivoted so that you can make sure your sweeper is completely within the counterweight or sides of the vehicle that you attach the magnets to.
The magnets attach to the bottom of the vehicle using these rare earth tripods, and the rare earth tripods allow you to connect to a steel surface that’s either on a slope or also curved.
If you wanted to connect to the corner of this shape, that magnet would allow you to do that.
It’s got a one to two inch recommended sweeping height.
You can see we’re really plugged up with just miscellaneous debris here, and you can adjust the height by adjusting these ropes to do that.
You can simply pull on it and the cam will engage to keep it in place, and to lower it down, you can release the cam and the magnet will drop.
These magnets—there’s three of them in each pod—are rated at 13 pounds of hold each.
The total sweeper weighs about three and a half pounds.
This magnet will pick up a nail if it’s three and a half inches off of the ground, but we recommend a one to two inch sweeping height, so it’ll pick up pretty much everything that you’ll encounter when you’re driving around at the speed that forklifts move at.
These cords here can be wrapped and stored out of the way. There are some little hooks that they attach onto at the top, and you can make whatever length you want by attaching as many of these or as few of them as you’d like. We attach them together so that it sort of controls the swinging of them.
It’s a lot more stable when they’re connected to each other end to end, and the cord also allows and makes sure that the magnet’s always hanging straight.
Although I’m on an angle here, it looks like those sweepers are tilted, but actually they’re parallel to the ground.
A: 3 units
B: 2 units
C: 1 unit
D: Dimension (inches)
The NOMIC Quick Attach Magnetic Sweeper is available in individual 6” magnet sections and can pin together easily to make a sweeper as long or short as needed. This makes the NOMIC able to fit almost any forklift on the market. Take a look at the CAD drawing below showing the minimum retracted and maximum extended dimensions of the NOMIC plus the suggested ground clearance and compare this to the space available under your forklift.
The 3.5 lb Nomic is suspended from 2 tripods. Each tripod contains 3 rare earth pot magnets which magnetically hold the tripod on the steel surface of the forklift which they are attached to. Each Pot magnet has 13 lbs of holding force. Therefore one tripod has a total of 3 x 13 lbs = 39 lbs of holding force.
In the video, see how easily just one tripod suspends a 25 lb weight.
The NOMIC will pick up a 2.5” inch nail when the bottom of the magnet is 3.5” inches off the ground providing plenty of pickup power performance when operating on moving forklifts. To maximize performance, we recommend setting sweeping height at 1” to 2” inches.
Connect multiple NOMIC units together to build the width of magnet you need.
Allows up to 35 degrees of adjustable arc curvature so that multiple NOMIC units can form an arc to match the rear shape of your forklift
The NOMIC Quick Attach Magnetic Sweeper is easy to install with no tools needed for assembly or installation.
The NOMIC is constructed from a durable Nylon material resulting in extreme durability.
Watch as we run over the NOMIC several times with a forklift.
It isn’t a guarantee that you can’t break the NOMIC, but it should eliminate your concerns about it’s durability.
We’re going to demonstrate the unforeseen event in which your Nomic fell off your forklift and you accidentally drove over it. We’re going to see what happens to it.
And we drove it over. You can see the tire tracks went right over that, and it’s actually—I’m quite surprised myself—this appears to be remarkably undamaged. The tripod is still intact.
We’ll go ahead and drive it over one more time for good measure. We’ve got a 5,000-pound capacity forklift that weighs about 9,600 pounds, and we’re running it over with the rear wheel, which is where all the weight is on the counterweight.
It cracked a little bit there, but this product still looks usable.
- No Surprise Border / Tariff Fees After Checkout
- Fast Shipping
- All Items in Stock
Secure Checkout
Fast Shipping
Easy Returns
They worked better than we could have hoped for. We will be ordering the bigger ones next to help save on flat repairs here at our mill. Great product.