Magnetic + Mechanical + Sensor Based Sorting & Cleaning Solutions to Reduce, Reuse, Recycle.
1 (519) 582-1386 (EST)
This product may be covered by one or more trade secrets, and pending or issued patents and trademarks. For a listing of our registered intellectual property, See Bluestreak Patent Information..
The Kursk Forklift Pin Mounted Magnetic Sweeper mounts on the rear pin of the forklift and doesn’t interfere with exhaust even if the exhaust on your forklift is vented through the pin slot.
No modifications to your forklift are necessary to mount the KURSK. The KURSK ONLY uses the existing pin on your forklift for mounting. You don’t have to modify, weld on or drill into your forklift to mount the KURSK. Simple!!
The KURSK can be mounted to a wide array of forklifts of many sizes and shapes. (see FIT guidelines for easy steps how to verify if the KURSK will fit your lift truck)
Continuous adjustment system allows precise sweeping height adjustment instead of fixed sweeping height positions so that you can fine tune the sweeping height to best suit your job site conditions.
The KURSK adds only 2.25” inches to the rear profile of your forklift.
Designed specifically to pick up tramp ferrous metal debris such as nails, screws, bits of wire, bolts, nuts, tools, and discarded pieces from fabrication activities.
Allows continuous clean up of metal debris while doing other work to eliminate labor costs of tramp metal cleanup.
$529.99
See Pricing For All Models Below
$529.99
| Kursk Series | Kursk 20 |
|---|---|
| SKU | KU20 |
| Sweeper Width | 20″ |
| Cleaning Method | Wipe clean with glove or rag |
| Sweeping Height Adjustability | Yes , continuous adjustment |
| Magnet Type | Ceramic 8 |
| Maximum Lifting Height (using a 2.5″ nail) | 4.25” inches |
| Total Sweeper Weight | 23.3 lbs |
| Total Shipping Weight | 24.8 lbs |
| Shipping Dimensions | 29″L × 7″W × 7″H |
| Pricing Range | $$529.99 |
Kursk Heavy Duty Construction
A: 0.1875” (3/16”) thick steel frame
B: 0.083” thick steel tube
C: 0.125” (1/8”) thick 6061 aluminum magnet housing
D: 0.1875” (3/16”) thick steel chain
E: 0.5” (1/2”) diameter threaded steel rod
F: 10 Gauge (0.134”) thick steel
Kursk Series Dimensions Back View
Kursk Series Dimensions Side View
A: Ground
Kursk Retracted Dimensions Side View
A: Bottom of pin slot
B: Ground
Kursk Maximum Extended Dimensions Side View
A: Bottom of pin slot
B: Ground
Kursk Maximum Extended Dimensions Side View
A: A = Distance from Magnet (Sweeping Height)
Note: Gauss (G) shown as the peak gauss measured in the center of the magnet at each distance.
Sorry, no reviews match your current selections
There are no accessories
The Kursk Forklift Pin Mounted Magnetic Sweeper has a super slim compact design that adds only 2 ¼” inches to the overall length and profile of your forklift so it doesn’t interfere with forklift operations in confined spaces. For further information see the CAD section for CAD drawings showing the overall dimensions of the KURSK.
The Kursk Forklift Pin Mounted Magnetic Sweeper only comes in one 20” magnet size. It was specifically kept to just one size because the KURSK hangs straight down from the back of the forklift and is NOT tucked under the rear counterweight of the forklift like the NAOS is, therefore to ensure the magnet does not stick out too far in the rear corners of the forklift, the magnet width was purposely kept at one smaller 20” size.
Because the Kursk doesn’t attempt mounting under the rear counterweight and because of the adjustability of the mounting frame, the Kursk is almost guaranteed to fit the majority of forklifts out there and fitting is easy.
See the “KURSK FIT Guidelines” for easy steps to make sure the Kursk will fit your forklift
Clamping system design allows continuous sweeping height adjustment with no predefined positions allowing you to precisely set the sweeping height to best suit your job site conditions.
KURSK Magnet Sweeping Height Adjustment Feature
To adjust the sweeping height of the magnet simply loosen the 3/8” inch steel hex bolts on each side of the Kursk Forklift Pin Mounted Magnetic Sweeper, you can then move the steel sliders up or down to precisely set your desired sweeping height.
The KURSK magnet can also pivot and swing backward or forward out of the way if it hits something occasionally on the ground because of the chain link mounting system.
It isn’t a guarantee of no damages if you hit something, but it eliminates damages in most circumstances where the magnet hits something.
The Kursk Forklift Pin Mounted Magnetic Sweeper will pick up a 2.5” nail when the bottom of the magnet is 4.25” off the ground providing plenty of pickup power performance in dirt and gravel and when operating on moving forklifts. To maximize performance we recommend setting sweeping height at 2” inches in most situations.
The KURSK uses permanently charged grade C8 magnets that will never need to be recharged. Power will never decrease, ensuring years of use.
The Kursk magnet is completely enclosed within the 1 ½” inch high x 3” inch wide x 20” long aluminum magnet housing. The magnet inside the housing is 1” inch high x 2 ½” inch wide unspaced but is 1” from each end of the magnet housing to allow for the housing end caps.
The Kursk Forklift Pin Mounted Magnetic Sweeper was designed specifically to pick up and remove debris that causes flat tires such as nails, screws, wire, discarded pieces of metal from fabrication activities, bolts, nuts, pins, screw drivers, wrenches, etc.
The KURSK allows you to clean up metal debris as other normal activities are carried out without adding more labor costs to do it because the magnet is picking up debris as the forklift does normal activities.
By eliminating the labor costs of solving the flat tire problem, the payback period of investing in the KURSK magnetic sweeper is very short. You only have to prevent one or two flat tires and the Kursk has paid for itself in terms of out of pocket costs of fixing flat tires, but also in terms of lost productivity and schedule disruptions that affect revenue generation in many cases.
The KURSK is easy to install and setup on any forklift in only a few minutes.
Any facility experiencing flat tires that has a forklift covering the area could use a KURSK to reduce flat tires.
- No Surprise Border / Tariff Fees After Checkout
- Fast Shipping
- All Items in Stock
English English 
English (Canada)
English (UK)
English (Australia)
Français du Canada
Español de México
Deutsch (Sie)
Português
Italiano
Polski
Nederlands
Ελληνικά
Svenska
Secure Checkout
Fast Shipping
Easy Returns
