Shipping Terminal
A Hanging Magnet Designed to be Raised and Lowered as Needed. With Quick Clean Off Sleeve
The ISO magnetic sweeper is a hanging magnet design specifically designed for cleaning large flat areas.
The ISO design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
High end “bumper wheels” keep the magnet off the ground and multiple mounting points keep this magnet where it should be.
A Quick Clean Off Sleeve makes cleaning debris off the magnet easy!
Get prices, specs, photos, videos, reviews and more...
Self Levelling Suspension & Onboard Debris Bins
Maximize Safety and Speed with the new industry standard for heavy truck magnetic sweeping
The Baffin magnetic sweeper is designed to be the premier front mounted heavy commercial truck magnet on the market. It’s suspension system keeps the magnet planted at the right height through hard turns and over bumps to eliminate the need for constant height adjustment. The Baffin also has a clean-off system that allows drivers to empty the magnet quickly and safely from the truck cab without ever having to get out of the truck or handle debris.
With a maximum pickup height of 10.75”, the Baffin is well suited to collect any metal debris up to 25 km/h (~15 mph) at the recommended sweeping height of 2” inches.
And the two on-board removable 1.65 cubic foot debris bins allow for the 95” inch wide magnet to be cleaned off multiple times before the bins need to be emptied. This increases efficiency by letting the magnet spend more time sweeping. And by easily keeping the magnet clear of debris there is more power available to collect debris which further increases efficiency.
Sweeping height adjustment (recommended 2”-5” inches) is done using stroke control blocks on the hydraulic cylinders. Moving from sweeping height to the travelling height of 10.5” inches just requires a cycle of the hydraulics (this position can be maintained by inserting all the supplied stroke control blocks or you may rely on the hydraulic system to keep the magnet suspended).
Get prices, specs, photos, videos, reviews and more...
For Fast, Aggressive Cleaning of Shipping Terminals. With Unique Slingjaw Clean Off System.
The Piranha magnetic sweeper is a tow behind model designed for fast, aggressive cleaning of shipping terminals. Unique Slingjaw clean off system dumps debris into the on board debris trays and holds it for later disposal.
The Piranha was designed for cleaning large areas like shipping terminals and therefore was given some special features. First of all, lots of power, to allow greater speed while still picking up debris.
It was also given on board debris bins since when cleaning large areas, you could be a long way from a dumping site when you need to clean off the magnet.
Available in a six foot or eight foot sweeping width.
Get prices, specs, photos, videos, reviews and more...
Designed to mount on the rear pin of your forklift. Available in a full range of sizes.
The Forager can adjusted to fit almost every brand and size of forklift on the market right out of the box.
It comes in 5 sweeping widths, multiple installation bracket positions combined with adjustable sweeping height. The fitting options ensure different height and sized forklifts of every kind are accommodated.
The Forager also features a Quick Clean Off Sleeve which makes cleaning debris off the magnet bar easy.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Forklift Magnet for Harsh Conditions
$6,199.99 – $6,699.99 USD
(all prices in USD)
Â
Available in 3 sweeper widths: 31″, 39″ 47″
The Forager XL is a bigger version of the popular Forager magnetic sweeper that used to be the largest rear mounted forklift magnet available on the market. It can adjust to fit almost any forklift on the market right out of the box. The Forager XL steel mounting bracket attaches to the rear pin of a forklift and is vented to allow for exhaust gases to flow freely even if it is routed through the rear pin port. This bracket hugs the counterweight on the forklift and allows the Forager XL to mount on most forklift rear pins.
The Forager XL Heavy Duty Rear Mounted Forklift Magnet comes in 3 sweeping widths and features a 7x7” permanently charged C8 ceramic magnet housing that can pick up a 2.5” nail from 12” off the ground. This allows the Forager XL to collect metal debris effectively while being mounted high enough to avoid ground strikes when operating on larger forklifts in rough terrain.
The Forager XL also features an aluminum Quick Clean Off Sleeve which makes cleaning debris off the magnet easier and protects the magnet housing from impacts while preventing the collected metal debris from pressing the sleeve against the magnet housing making it hard to clean off. Further protection to the magnet is provided by allowing the magnet housing to pivot fore and aft and allowing the magnet to move up in the housing to prevent damage from ground strikes.
Get prices, specs, photos, videos, reviews and more...
Rear Pin Mount Design That Hugs the Forklift. Fits your forklift like a glove!
The Guardian forklift magnet is a rear pin mount design that increases forklift maneuverability with a super slim profile that wraps around in an arc and hugs the back of the forklift.
This slim profile is specifically designed for forklifts that need to maintain maximum manoeuverability and/or need to work around tight, congested areas.
Easy clean off system by simply pulling up on debris Release Handles. Debris is cleaned off the magnet without bending over.
Designed for permanent mounting.
Get prices, specs, photos, videos, reviews and more...
For Flat Asphalt and Concrete Terminal surfaces! With bump wheels for some added protection.
The PYR hanging magnet was designed for flat terrain and “on road” type uses where not much ground strike prevention is needed. “On road” type bump wheels are provided on the ends to eliminate magnet strikes due to occasional potholes, inclines/declines and speed bump type obstacles.
Choose from 2 different models with different magnet strengths, and 6 different magnet lengths from 3 to 8 feet, to get the perfect setup for your application.
Maximum lifting height of 6” inches (using a 2 ½ inch nail) for the PYR 3”x3” model, and 9 ¼” inches for the PYR 4.5”x4.5” model. Measuring Magnetic Sweeper pickup power and performance.
Also includes 4 stabilizing chains with 8 quick clips to hang the PYR from your vehicle.
Standard debris clean off method is to wipe the magnet clean with a glove or rag. However a black PVC Quick Clean Off Sleeve accessory may be purchased separately for quick and easy debris removal.
Get prices, specs, photos, videos, reviews and more...
Tucks under forklift for super low profile! Adds only 1.75” inches to rear profile of the forklift
The NAOS forklift magnet is a rear pin mount design that positions the magnet under the rear counterweight of the forklift to achieve a super low profile and keep forklift maneouverability to a maximum in tight surroundings with little room.
“Swing up” clean of Design allows for easy clean off without getting down and under the forklift. Just unscrew wing nuts and swing the magnet up to waist level to clean it off with a glove or rag over a garbage pail.
Ground strike protection provided by a pivoting magnet and pivoting magnet arms which allow the magnet to swing up and out of the way if the magnet strikes the ground.
Continuous adjustable sweeping height, with no fixed positions, allows precise sweeping height settings to suit your job site.
Comes in 4 sweeping widths, with multiple installation brackets and bracket positions to ensure different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
Get prices, specs, photos, videos, reviews and more...
Economical rear pin mount Forklift magnet. Simple design in one size.
The KURSK forklift magnet is a rear pin mount design whose frame only adds 2.25” inches to the back profile of the forklift. The magnet bar itself is not positioned under the forklift counterweight like the NAOS, but rather hangs straight down from the KURSK frame and therefore will also stick out from the back of the forklift, but the single 20” inch magnet bar width keeps this to a minimum.
Ground strike protection is provided by chains that allow upwards and forward/backward movement which allows the magnet to swing up and out of the way if the magnet strikes the ground or an object.
Adjustable clamping system provides continuous adjustable sweeping height, with no fixed positions, allowing precise sweeping height adjustment to suit your job site and forklift.
Leading edge guard on magnet prevents magnet bar from sticking to your forklift.
Comes in one 20” inch sweeping width, design ensures different height and sized forklifts of every kind are accommodated. See FIT guidelines for details.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Fork Mounted Magnet! With pivoting debris tray for easy debris removal.
The OBLAST forklift magnet is a fork mount design that allows you to use your forklift to pick up ferrous metal debris and then lift the OBLAST over a disposal / scrap bin for easy removal by using the easy flip down pivoting stainless steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on the rotating stainless steel debris tray for long life and a solid feel.
Ground strike protection is provided by the angled front and rear of the stainless steel debris tray which reduces the width of the bottom flat section and therefore limits magnet contact with the ground, and prevents damage if the magnet does contact the ground because there is no hard edge to “catch” on the ground.
Upward clamping fork pockets provides greater contact of the fork pockets with the forklift forks and therefore provides greater stability to reduce magnet “slippage” on the forks.
Comes in one 52” inch magnet sweeping width, and easily mounts to forklift forks up to and including 6” inch wide forks on 24” inch fork centers. See CAD drawings for further details.
Get prices, specs, photos, videos, reviews and more...
Remote controlled height adjustment without leaving the cab of your vehicle!
With outdoor rated IP65 12-volt DC actuators rated at 562 lbs each and 7.5” inches of up and down movement for remote controlled raising and lowering of magnet from raised travelling to lowered sweeping position.
The ALPHA is the same as the AETHER magnetic sweeper but with the addition of the remote-controlled electric actuators for up and down movement.
Like the AETHER the ALPHA was designed for those off-road dirt and gravel situations where more ground strike prevention is needed.
The 10” x 3” flat proof bump wheels on the ends prevent the magnet from hitting the ground and from sinking into loose surfaces, and the wheeled outriggers provide additional ground strike prevention in the middle of the magnet’s overall length.
Maximum lifting height of 9” inches (using a 2 ½ inch nail). See Gauss strength measurements at various sweeping height distances also available.
Comes standard with a black PVC Quick Clean Off Sleeve for quick and easy debris removal.
Get prices, specs, photos, videos, reviews and more...
Rough Terrain Heavy Duty Fork Mounted Magnet! With ground tracking four link suspension.
The UPLAND is a fork mounted magnetic sweeper that can pickup any ferrous debris such as: nails, screws, wire, discarded fabrication material, bolts, nuts, pins, screwdrivers, wrenches, etc. The debris can easily be dumped into a bin using the flip down stainless-steel debris tray.
Heavy duty construction of steel and stainless, with UHMW bushings on all pivot points of the UPLAND ensures a long life for the UPLAND and a solid feel on every motion.
The UPLAND features 10” of vertical suspension travel and 360 degrees of pivot movement rolling on 16.5” flat proof tires. This allows operators to set the UPLAND at a sweeping height of 1 – 4” inches which will be maintained over rough terrain by the ground tracking system.
Upward clamping fork pockets provides greater contact of the fork pockets with the forks and therefore provides greater stability to reduce magnet “slippage”.
Comes in one 56” inch magnet sweeping width, and easily mounts to forks up to and including 5.5” inch wide forks on 22” inch fork centers. See CAD drawings for further details.
Get prices, specs, photos, videos, reviews and more...
Heavy Duty Fork Mounted Magnetic Sweeper with Remote Clean Off and Ground Tracking Suspension System
The Nova Fork Mounted Magnetic Sweeper is a powerful 74” wide magnet that is built to cover ground quickly and easily with little effort from the forklift operator thanks to the ground tracking system, and remote clean off functions.
The ground tracking system keeps the magnet rolling at your selected sweeping height through rough terrain with 11” of vertical suspension travel and 360 degrees of pivot movement that allows the forklift to travel and turn without being impeded by the Nova as it rolls on 16.5” urethane foam filled tires.
The 6” inch by 8” inch magnet housing will pick up a 2.5” inch 8 penny nail from 12”inches off the ground, giving more than enough pickup power to retrieve most kinds of metal debris at speed including nails, bolts, wrenches, trailer / container seals / locks.
The Nova uses two remote activated 12-volt linear actuators powered by an on-board battery with 450lbs of pressing power each. Once activated from the seat of the forklift via remote control, the actuators press against a 16-gauge stainless steel debris pan which separates the collected debris from the magnet field to easily clean off the magnet into any container or dumpster.
Get prices, specs, photos, videos, reviews and more...
Mounts to Any Forklift In Minutes Using Rare Earth Magnets!
The Vigilant Forklift Magnetic Sweeper mounts to the bottom of any forklift in minutes and is an easy way to continuously clean metal debris up while the forklift performs its daily tasks. The Vigilant mounts to any flat steel surface using four quad rare earth magnet pods that each have 52lbs of holding force. It comes with a quick clean off sleeve that allows for the collected debris to be removed easily from the magnet without having to bend over or scrape anything from the magnet.
The Vigilant comes in either a 36” or 42” sweeping width which is suitable for most indoor / outdoor forklifts, mounting the magnet in the middle of the forklift also prevents damage since it is tucked away under the forklift and doesn’t extend outside of the wheel width.
The Vigilant magnet housing is built out of anodized aluminum and comes with a PVC clean off sleeve that has wrap around function to hang onto metal debris even if the magnet strikes the ground. The Vigilant magnetic sweeper can pick up a 2.5” nail from a height of 3.25” inches, meaning when it is hung at the recommended 1-2” sweeping height there is plenty of magnetic pickup power.
Get prices, specs, photos, videos, reviews and more...
Rare Earth Powered Magnetic Cleaning, Attaches in Minutes to Any Metal Surface
The Defiant Magnet Mounted Hanging Forklift Magnetic Sweeper mounts to any forklift in minutes with no tools and is the easiest way to utilize permanently charged rare earth magnetic power to continuously clean a job site or facility with no additional labour costs.
Forklifts travel through all high-traffic areas frequently, having a magnet that removes any bolts, nails, staples, banding or wire from these areas ensures less down time from damaged tires on equipment, and less chance of personnel injuries.
Able to pick up a 2.5” 8 penny nail from 4”inches there is plenty of pickup power when operating between 1 and 2 inches. The Defiant hangs between the wheels of the forklift and doesn’t extend out the sides so movement is never impeded.
Get prices, specs, photos, videos, reviews and more...
Quick Tips
What do the staff of Bluestreak have to say on the subject of Shipping Terminal Magnets?
Attaching a magnet such as a Forager or ISO to a vehicle already operating in the area is always the cheapest way to pick up metal debris.
Tony - Bluestreak Equipment
Shipping Costs & Methods
Shipping Options
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
International Shipping
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Payment Methods
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
Â
Know what you need for your next project?
The maximum lifting height of Shipping Terminal Magnets;
ISO | 9 inches
Baffin | 10 and 3/4 inches
Piranha | 10 and 1/2 inches
Forager | 8 and 1/2 inches
Forager XL | 12 inches
Guardian | 7 and 1/4 inches
PYR 3" x 3" | 6 inches
PYR 4.5" x 4.5" | 9 and 1/4 inches
Naos | 4 and 1/4 inches
Kursk | 4 and 1/4 inches
Oblast | 10 and 1/2 inches
Alpha | 9 inches
Upland | 10 and 3/4 inches
Nova | 12 inches
Vigilant | 3 and 1/4 inches
Defiant | 4 inches
For more information on Pickup Power follow this link: “Measuring Pickup Power and Performance in Magnetic Sweepers”
Forager
Pyr 4.5"x4.5"Reduce costly flat tires at shipping terminals with a magnetic sweeper.
Improve your shipping terminal maintenance.
Shipping terminals suffering from costly unscheduled downtown and flat tire repair costs can be helped by keeping the site clear of flat tire causing metal debris. Metal debris is a built in problem at shipping terminals because of the locking tags and devices that are cut off container doors and from all of the truck container movement. But most metal debris at shipping terminals can quickly and easily be picked up with a magnetic sweeper.
The debris in shipping terminals is considered light but the need for FOD control is considered moderate due to the cost of damage to tires of equipment and trucks and the related schedule disruptions.
Manufacturing In-House
All of our products are designed and manufactured on site at our facilities in Ontario, Canada.
Application-Driven Design
We have manufactured and developed application driven magnetic products since 2005.
Working from Rural Roots
Working from rural southern Ontario, our business has grown and now sprawls over several properties using former agricultural buildings.
Made In Canada
All products proudly designed and manufactured in Canada
(since 2005).
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.
