There is really only 1 type of Telehandler magnet:
Hanging Magnets are the obvious choice for Telehandlers and are either hung from the rear bumper or underneath the telehandler between the front and rear wheels. This type of Telehandler magnet is usually meant to be permanently mounted.
$2,469.99 – $4,779.99 USD
Available in 6 sizes: Remoras 38″, Remoras 50″, Remoras 62″, Remoras 74″, Remoras 86″, Remoras 98″
Get prices, specs, photos, videos, reviews and more…
The Remoras magnet is an "all terrain" hanging magnet that you can attach to equipment you already use and own. This magnet is specifically designed to withstand frequent ground hits while picking up metal debris from uneven and rough surfaces with potholes and ruts.
Normal hanging magnetic sweepers like the Wrasse series can’t stand up to the pounding of hitting the ground over and over as the equipment wheels go into ruts and potholes, but the Remoras series can withstand frequent ground hits with no damage to the magnet housing itself. A protective cage protects the magnetic housing from hitting the ground when your vehicle travels over uneven, rough terrain.
Magnets of this type are very useful if there are severe ruts in industrial yards caused by constant use over the same path by heavy vehicles.
$495.99 – $1,597.99 USD
Available in 3 magnet housing sizes: Wrasse 2″x5″, Wrasse 3″x 3″, Wrasse 4.5″ x 4.5″
Available in 7 sweeping widths: 26″, 38″, 50″, 62″, 74″, 86″, 98″
Get prices, specs, photos, videos, reviews and more…
The Wrasse hanging magnetic bar is designed for use on "flat terrain". It is extremely versatile because it comes in many different sizes, in terms of strength and width. The Wrasse hanging magnet bars are available in widths from 26” – 98” inches and in 3 different magnet housing sizes: 2” x 5” inches, 3” x 3” inches, and 4.5” x 4.5” inches each level of housing size offers more magnetic strength than the previous.
The Wrasse can hang from almost any piece of equipment if the ground the vehicle traverses is fairly even so that the magnet bar doesn’t hit the ground all the time which can cause damage to the housing. The Wrasse hanging magnet bar functions very well at allowing the equipment operators to clean environments while they do their normal tasks.
There are also optional Quick Clean Off Sleeves available for the Wrasse. A PVC Quick Clean Off Sleeve is available for the 3"x 3" inch and 4.5″ x 4.5″ inch models which makes cleaning debris off the magnet bar easy. A Heavy-Duty Aluminum Quick Clean Off Sleeve is available for some 4.5” x 4.5” inch sweeping widths, this sleeve also assists in cleaning debris from the magnet and increases the durability of the sweeper.
$2,749.99 – $3,349.99 USD
Available in 4 sweeper widths: ISO 62″, ISO 74″, ISO 86″, ISO 98″
Get prices, specs, photos, videos, reviews and more…
The ISO magnetic sweeper is a hanging magnet design specifically designed for highway maintenance operations.
The ISO design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
High end “bumper wheels” keep the magnet off the ground and multiple mounting points keep this magnet where it should be.
A Quick Clean Off Sleeve makes cleaning debris off the magnet easy!
$989.99 – $2,609.99 USD
Available in 6 sweeping widths: 38″, 50″, 62″, 74″, 86″, 98″
Get prices, specs, photos, videos, reviews and more…
With 10” inch x 3” inch wide flat proof Bumper wheels. The EIGER was designed for those slightly more off-road surfaces with more uneven surfaces such as dirt and gravel where potholes and bumps exist.
Designed with wide wheels to stay on top of those surfaces, and also designed with a greater minimum sweeping height of 2.5”inches to prevent the sweeper from hitting the ground.
Comes standard with black PVC Quick Clean Off Sleeve for easy debris removal, and 4 hanging chains with 8 quick clips to hang the EIGER from your vehicle.
$3,209.99 – $3,869.99 USD
Available in 4 sizes: AETHER 62”, AETHER 74”, AETHER 86”, AETHER 98”
Get prices, specs, photos, videos, reviews and more…
The AETHER hanging magnet was designed for those off road dirt and gravel situations where more ground strike prevention is needed than the EIGER provides, but less ground strike prevention than the REMORAS provides.
The 10” x 3” flat proof bump wheels on the ends prevent the magnet from hitting the ground and from sinking into loose surfaces, and the wheeled outriggers provide additional ground strike prevention in the middle of the magnet’s overall length.
Maximum lifting height of 9” inches (using a 2 ½ inch nail). Measuring Magnetic Sweeper pickup power and performance.
Comes standard with a black PVC Quick Clean Off Sleeve for quick and easy debris removal. Also includes 6 stabilizing chains with 12 quick clips to the AETHER from your vehicle.
$2,519.99 – $3,119.99 USD
Available in 4 sizes: 62”, 74”, 86”, 98”
Get prices, specs, photos, videos, reviews and more…
The KHAMSIN hanging magnet was designed for more “off road” applications such as gravel, sand, and dirt roads and yards, or grass covered areas. Ideal for rural roads or gravel roadsides. Ideal for gravel parking lots and driveways.
The KHAMSIN design allows you to leave the magnet permanently mounted, enabling you to lower and deploy the magnet for use when needed, and then easily raise and secure it when not needed or for transport between locations.
Larger 10” x 3” flat proof bump wheels keep the magnet from hitting the ground or sinking into softer ground surfaces.
The KHAMSIN has a slightly higher minimum sweeping height of 2.5” inches compared to the ISO’s minimum sweeping height of 1.75” inches, in order to operate more effectively in off road applications.
A Quick Clean Off Sleeve comes standard for quick and easy debris removal.
$3,949.99 – $4,629.99 USD
Available in 4 sizes: Erebus 62”, 74”, 86”, 98”
Get prices, specs, photos, videos, reviews and more…
The Erebus Heavy Duty Offroad Hanging Magnet is built to clean metal from the toughest job sites, the onboard out-riggers and aluminum sleeve protect the magnet housing from ground strikes and scrapes. The Erebus also has 10.5 “ x 3.25” Carlisle flat free bump wheels that allow the magnet to roll over changing terrain rather than hit the aluminum clean off sleeve off the ground. The wheel bearings have been replaced with custom 5/8” UHMW bushings that can withstand greater impacts and roll smoothly.
From recycling centers to highway maintenance, the Erebus is a heavy duty durable magnet with exceptional pickup power. It can pick up a 2.5” 8 penny nail from 8.25” off the ground, so in the recommended sweeping height range of 3-5” there is plenty of power available to collect metal debris. The aluminum clean off sleeve resists crush forces that normally make clean off sleeves difficult to remove and slides easily on PVC rails inside the aluminum sleeve that prevent friction.
The Erebus can be easily mounted on a Bluestreak Equipment hanging bracket or by using the included chains with quick links. A hanging magnet mounts easily on a variety of vehicles and is a versatile tool for keeping job sites clean and safe for personnel and equipment.
What do the staff of Bluestreak have to say on the subject of Telehandler magnets?
Clean the magnet off more frequently because I’ve seen them completely covered with nails, screws and metal debris so much so that the amount of debris stuck to the magnet now makes it quite hard to clean off, and when extremely covered with debris like that the magnet isn’t as effective as it could be, so clean the magnet off more often!
Karren - Bluestreak Equipment
What do the staff of Bluestreak have to say on the subject of Telehandler magnets?
Buy the biggest hanging magnet you can in terms of pickup strength to maximize effectiveness, yes you’ll spend a bit more on the magnet but it will be worth it and keep in mind hanging magnets are a really economical magnet option because you’re just paying for a big magnet bar so don’t skimp on it.
Karren - Bluestreak Equipment
Shipping options and charges available at checkout.
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Full line of magnetic sweeper products. All items in stock. Shop Online and Pay by Visa, Visa Debit, Mastercard, American Express, Discover, Diners Club, JCB, PayPal or Pay by Cheque or EFT / Wire Transfer.
Make sure the magnet strength matches the type of debris you expect to be picking up. If you want to pick up heavy metal debris a light weight small magnet probably won’t do the job.
The rougher, dirtier terrain your Telehandler operates in the stronger the magnet your likely going to want, because the magnet will have to be set higher to avoid constantly hitting the ground. The magnet will also need to pick up debris through some dirt therefore you need a stronger magnet. The rougher the terrain that exists because of things like bumps and pot holes, more you will want or favor a magnet that has some protection built in to the design to either deal with the abuse of hitting the ground or being able to move out of the way when it does hit the ground in order to prevent damage.
A magnet may work really well at picking up debris, but how easy is it to clean off? Think through how you would clean the magnet off step by step. Make sure it makes sense to you and your situation. Pay attention to the details of how this will work right to the point of getting the debris in the garbage or scrap bin.
You are not going to be cleaning your magnet off constantly, so it’s important that when your magnet does pick up a nail or screw that the magnet secures the debris so that it won’t fall off if the magnet is suddenly shaken because of a bump or if the bottom of the magnet hits the ground and the debris is wiped backward on the magnet. The last thing you want is for the debris to fall off again. Make sure your magnet has some feature like our “Wrap Around Feature”, it not only makes sure debris doesn’t get wiped off the bottom of the magnet, it makes the debris holding capacity higher and you’ll find in practice that most of your debris ends up on the side of your magnet not the bottom of it. And that’s a good indication to you why we have this feature.
The maximum lifting height of the Telehandler Magnets;
For more information on Pickup Power follow this link: “Measuring Pickup Power and Performance in Magnetic Sweepers”
Telehandlers, like forklifts, move things around at many locations and in the process of moving things around pieces of metal fall off trucks, pallets and the material being moved. In many cases it’s not the material being moved by the Telehandler that causes the debris problem. It may be that you have metal debris at the site from other equipment or processes. Since the Telehandler is moving around the site it is a convenient and obvious choice for mounting a magnet. By mounting a magnet to the Telehandlers it can sweep the site for metal debris while carrying out normal operations at no additional labor cost
Telehandler magnets pay for themselves quickly by preventing flat tires and downtime of equipment, and repair costs.
Cleaning off hanging magnets is easy with a Quick Clean Off Sleeve. Just pull the sleeve off and all the metal debris falls off the one side of the magnet.
All of our products are designed and manufactured on site at our facilities in Ontario, Canada.
We have manufactured and developed application driven magnetic products since 2005.
Working from rural southern Ontario, our business has grown and now sprawls over several properties using former agricultural buildings.
All products proudly designed and manufactured in Canada
(since 2005).
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All products are stocked for quick shipping and delivery.