Kubota Snowplow Mount for Hanging Brackets

Okay, so here’s how our new Kubota bracket hooks up to the snowplow system on a Kubota. You’ll see that bright T-handle there—that’s getting grabbed—that is the pin that goes into the bottom of our bracket and that secures everything. Then you’ll see that lug just popped out, so that lug sits in the J hook there, and then the pin goes through the hole at the bottom of the bracket. That’s basically the same system Kubota uses to hold their snowplow on.

So we’ve basically just adapted that system to work with our magnets and our brackets. This bracket is available for sale separately from everything else, and you can bolt any of our existing hanging brackets—A, B, C, D, whatever—they will all bolt to it. So you can mount any one of our hanging magnets on a Kubota with a snowplow if you have it.

And there you go, hooked right back up in 10 seconds—pretty easy. Then everything from there is just bolt-on: just tubing on the top, big bolts going through the hook into the hanging bracket, and those are the same mounting holes as every one of our other hanging brackets. So this is compatible—if you have an existing hanging bracket from us, the snowplow mount’s compatible with it.