Recommended Industry Applications
The Fission is a Continuous Discharge Magnet for Surface Preparation & Shot Blasting Operations.
The Perfect Balance of Size & Performance!
Specifically designed for heavy use by shotblasters and surface preparation operators who need to pick up steel shot.
The Fission uses Bluestreak’s patented Ripwhirl technology to continuously clean shot off the magnetic drum and deposit the shot into an on board removable debris tray as you push the sweeper. The tray holds approximately 42 lbs of steel shot.
Because the drum continuously cleans off the magnet, you always have full pickup strength increasing the effectiveness of shot pickup. Because the magnet is always at full strength, all shot gets picked up without having to go over the same area several times.
The Fission has twice as much rare earth magnet as the Theta Series enabling maximum performance at cleaning shot out of expansion joints and cracks.
Productivity is greatly increased due to the elimination of the clean off and pickup efforts associated with conventional magnets.
See Pricing For All Models Below
Fission™ magnetic sweeper$ 3199.99
Weight: 49 lbs | Length: 36
Width: 21 | Height: 11
* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.
|0.340 inches at lowest fin point
|Automatic Continuous Discharge
|One Piece Extruded PVC Design
|Front 8″ and rear 3″ Thermoplastic rubber, non-marking with 5/8″ sealed precision bearings, and rugged polypropylene hubs, 8″ wheels and have a 700 lb load rating.
|Magnetic Surface Area
|Maximum Lifting Height
|Will pick up 100% of shot from 1 3/4″ below wheels, and decreasing percentage of shot as floor cracks get deeper.
|Total Sweeper Weight
|Total Shipping Weight
|36″L x 21″W x 11″H
There are no CAD drawings.
1 file(s) | 204.99 KB
1 file(s) | 218.66 KB
1 file(s) | 271.17 KB
1 file(s) | 452.84 KB
Part #1 Fission 3″ Thermoplastic Rubber Wheels mounted on a Polypropylene Core (Item a) (2 pcs)$ 37.66
There are no Fission accessories.
More Pickup Power with Super Strong N42 Rare Earth Magnets that are permanently charged.
Automatic Discharge with more pickup power
Continuously cleans shot off the magnetic drum and deposits shot into an on board removable debris tray as you push the sweeper .
The Fission tray is twice as big as the Theta Series tray and holds approximately 42 lbs of steel shot allowing you to cover a larger area before emptying the tray.
The Fission cleans up the same size of area faster than a traditional magnetic sweeper. Real world comparisons show that the Fission is more than twice as fast at cleaning up shot than a traditional sweeper like the Bluestreak Bora magnetic sweeper. That’s less than half the time picking up shot if you use the Fission. The resulting labor savings frees people up to do other work and gets the job done faster or reduces your need for staff.
There is a real improvement experienced by the operator of the Fission because there is not as much bending over involved. The tray holds 42 lbs of shot, it’s easy to see when the tray is full and when it’s full the handle is easy to grab and you just dump it into whatever you want. The sweepers are so easy to use that its turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.
The Fission is designed to last. And because of the quality of its design and construction and because of the availablity of replacement parts when needed you can keep your Fission going for years resulting in lower long term costs of ownership compared to many cheaper magnetic sweepers. Parts are available for the Fission on this website or from Bluestreak dealers.
Automatic Continuous Discharge System
Larger Debris Bins On Board
The Fission tray is twice as big as the Theta Series tray and holds approximately 42 lbs of steel shot allowing you to cover a larger area before emptying the tray. There is a real improvement experienced by the operator of the Fission because there is not as much bending over involved. The operator doesn't have to keep going over the same area to pick up all the steel shot because the Fission gets it all in one pass. There's also no guess work involved to know when the magnet is full of steel shot. It's easy to see when the tray is full and when its full the handle is easy to grab and you just dump it into whatever you want. The sweepers are so easy to use that it’s turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.
Durable Steel Handle and Comfortable Grips
Double steel handle with durable padded hand grips provide comfort and durability and positions your hands for easy pushing.
Tremendous Amount of Power
The Fission is made with super strong permanent magnets made from alloys of rare-earth elements that handles picking up shot of all sizes very well.
The magnet power from these magnets cleans out expansion joints and cracks because it picks up 100% of shot from 1 3/4″ below the bottom of wheels which will result in less shot showing up in the finished floor coating resulting in higher quality results.
Shipping Costs & Methods
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Made In Canada
All products proudly designed and manufactured in Canada
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.