Recommended Industry Applications
The Atmos is a Continuous Discharge Magnetic Sweeper For Shotblasting Surface Preparation Operations
Flexible Design for Double Duty!
The Atmos is specifically designed for heavy use on large areas by shotblasters who need to pick up steel shot of all sizes. The Atmos is designed with Bluestreak’s patented Ripwhirl Technology to continuously clean shot off its magnetic drum and deposit the shot into an onboard removable debris tray as you push the sweeper.
Because the drum continuously cleans off the magnet, you always have full pickup strength increasing the effectiveness of shot pickup. The magnetic drum features a new durable one piece extruded PVC design for long lasting wear.
The Atmos features a flexible design. It easily converts from a tow behind magnet to a push type magnet simply by flipping the handle. Tow the Atmos behind vehicles and equipment to cover a lot of ground faster. Or push the Atmos by hand like a regular push type magnet.
See Pricing For All Models Below
Atmos™ magnetic sweeper$ 5899.99
Weight: 127 lbs | Length: 64
Width: 21 | Height: 11
* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.
|Atmos Series||Atmos 52|
|Ground Clearance||0.340 inches at lowest fin point|
|Cleaning Method||Automatic Continuous Discharge|
|Housing Construction||New Design! One Piece Extruded PVC Design|
|Wheels||Rear 8″ and front 6″ caster are Thermoplastic rubber, non-marking and are 700 lb load rating each with a 5/8″ sealed precision ball bearing and rugged polypropylene hubs|
|Magnetic Surface Area||N/A|
|Maximum Lifting Height||Will pick up 100% of shot from 1 3/4″ below wheels, and decreasing percentage of shot as floor cracks get deeper.|
|Total Sweeper Weight||118 lbs|
|Total Shipping Weight||127 lbs|
|Shipping Dimensions||64″L x 21″W x 11″H|
There are no CAD drawings.
1 file(s) | 201.02 KB
1 file(s) | 379.58 KB
1 file(s) | 477.61 KB
1 file(s) | 232.80 KB
Part #1 Atmos bolt bag of assorted steel hardware (Items a b c d e f g h i j k l m n o p ) (76 pcs)$ 98.22
A Shot Blasting Magnetic Sweeper with a Continuous Discharge Clean Off System
Automatic Discharge with more pickup power
Continuously cleans shot off the magnetic drum and deposits shot into an on board removable debris tray as you push the sweeper.
Easy to use and operate
There is a real improvement experienced by the operator because there is not as much bending over involved. Each of the 2 trays hold 42 lbs of shot, it’s easy to see when the tray is full. When it’s full the handle is easy to grab and you just dump it into whatever you want.
The sweepers are so easy to use that it turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.
Two tray collection system
Each of the 2 trays hold approximately 42 lbs of steel shot allowing you to go further before emptying the trays.
Purchase 2 additional trays as an accessory to make a total of 4 trays to extend your sweeping time before having to empty the tray.
Two in One Flexible Design!
The Atmos is a push type magnet and tow behind magnetic sweeper in one package. It easily converts from one to the other by simply flipping the handle.
Recover A Lot of Shot of All Sizes Very Quickly
Increase Your Productivity.
The Atmos cleans up the same size of area faster than a traditional magnetic sweeper. Real world comparisons show that the Atmos is 5 times faster at cleaning up shot than a traditional sweeper.
Pick up Shot from 1 3/4" below wheels
The Atmos picks up 100% of steel shot from 1 3/4″ below the wheels, that means it can pick 100% of steel shot from out of cracks 1 3/4″ deep. It can pick up shot from deeper cracks but gets less and less of it as the depth increases. This allows you to thoroughly clean out cracks and expansion joints which results in less shot showing up in the finished floor coating which has a direct effect on the quality of the finished floor.
Shipping Costs & Methods
Shipping options and charges available at checkout.
Real-Time Shipping Rates
Shipping rates are calculated by connecting directly to shipping carriers, giving you real time shipping quotes when you order online.
Some international orders outside North America may require a freight quote on checkout before the order can be completed.
Made In Canada
All products proudly designed and manufactured in Canada
No Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Items In Stock
All products are stocked for quick shipping and delivery.