Use the YAK magnetic sweeper to pick up metal debris BEFORE you drive over it!
The best thing about a front mount magnetic sweeper like the YAK is that you don’t have to drive over the debris before you pick it up. Therefore you don’t risk getting a flat tire!
And the YAK was made to do this easily because it was designed to any fit any UTV side by side vehicle right out of the box by utilizing any UTV snow plow setup as the connection point to the UTV.
If you have a snow plow setup already, you’re ready to mount the YAK. If you don’t have a snow plow setup, you can get one from your local UTV dealer or another aftermarket manufacturer in order to mount the YAK.
A quick overview of the YAK’s main features.
All Items in Stock
We stock all of our products.
We ship our magnetic products worldwide from Asia to the Yukon from Europe to the United Arab Emirates.
Easy online ordering.
Pay by Visa and MasterCard or EFT/Wire Transfer.
THE UTV Accessory that cleans up metal debris and sends it packing.
Ideal for construction sites, equine facilities, farms, manufacturing and industrial site roads and yards, site remediation and landfills.
Many commercial and industrial facilities, construction sites, landfills, equine facilities and disaster relief workers have a need to eliminate flat tires on vehicles. The cost, interruptions, and delays that flat tires cause create the need for the use of a magnetic sweeper and the YAK was designed specifically to pick up and remove debris that causes flat tires such as nails, screws, wire, discarded pieces of metal from fabrication activities, bolts, nuts, pins, screw drivers, wrenches, etc.
Powerful Pickup Performance of 7 ½ inches
The YAK utilizes permanently charged C8 Ceramic Magnets to provide a strong magnetic field with a maximum lifting height of 7 1/2” using a two and a half inch nail.
The YAK will pick up a 2 ½” nail when the bottom of the magnet is 7 1/2” off the ground providing plenty of pickup power performance in dirt and gravel and when operating on a moving UTV. In speed tests the YAK reliably picks up 2 ½” nails at 13kph, with the sweeping height set at 2 ½” off the ground.
Flat proof tires and adjustable sweeping height to suit any conditions
Sweeping height is adjustable from 1 to 4 inches, in half inch increments, to accommodate any conditions by adjusting the caster wheels up or down.
This is a manual process, done by moving the bolt hole position of the caster, but it can be done in several minutes if needed and most users will generally set the sweeping height once to fit their site conditions and leave it at that height.
Wrap Around Feature
Wrap around feature to hold onto debris in off road conditions
The “Wrap Around” magnet design ensures debris never gets wiped off the bottom of the magnet in grass or off road dirty and bumpy conditions.
The “Wrap Around” feature is an essential design feature if you will be using the magnetic sweeper in grass or dirt conditions and is one of the key features that make the YAK truly off-road capable.
Recommended Industry Applications
Easy to USE
Just lower the YAK onto its casters using your UTV winch or other lifting device to start sweeping. The off-road flat-proof 10” x 3” casters ensure a consistent height off the ground is maintained when sweeping and also take the weight off the front of the UTV and allow normal UTV manoeuvering.
To clean off the YAK magnetic sweeper when full of debris, just raise the magnet using your UTV winch or other lifting device, and push down on the clean off handle on the side of the unit.
Easy to use Debris Clean off system.
Debris Release Handle does the job in seconds!!
The YAK comes standard with a Debris Release Lever clean off system. A quick pull on the handle rotates the magnet inside the covered lid resulting in the debris dropping to the ground. Clean off takes only seconds. To make clean off even easier, a double handled orange poly debris catcher is provided to put under the magnet during clean off, which can then catch the debris and be used to dump the debris into a garbage bin.
Debris Release Demo at a Landfill Site
Heavy duty construction for long term durability.
The YAK uses permanently charged C8 Ceramic magnets that will never need to be recharged. Power will never decrease, ensuring years of use.
The YAK magnet is completely enclosed ensuring the magnet does not become covered with debris.
The YAK has Sand blasted and powder coated steel components for durability that will continue to look good for years to come.
Replacement parts can be ordered on this website if needed.
Hitch and de-hitch quickly!
The YAK comes almost fully assembled and is easy to install and setup on any UTV in only a few minutes. See Assembly and Installation Instructions.
The YAK once setup can also be hitched and de-hitched quickly when needed.
Specification Details on the YAK
|Cleaning Method||Debris Release Handle|
|Sweeping Height Adjustability||Yes 1 to 4 Inches, in ½” increments|
|Magnet Type||Ceramic 8|
|Maximum Lifting Height (using 2.5″, 8 penny nails)||7 1/2 inches|
|Total Sweeper Weight||249.1 lbs|
|Total Shipping Weight||274 lbs|
|Shipping Dimensions||73″L x 23″W x 19″H|
Construction Materials Details
* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.
Pay by Visa and MasterCard Credit Cards.
EFT or Bank Wire
Pay by Electronic Funds Transfer or Bank Wire Transfer.
If you are a government organization you can order with a Purchase Order and pay in net 30 days by cheque.
Made in Canada
Made in Canada
All products proudly designed and manufactured in Canada
No USA/Canada Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Products in Stock
All products are stocked for quick shipping and delivery.
Go ahead, share it…