The Quicker Picker Upper
for picking up all sizes of shot

The Fission is a Continuous Discharge Magnet for Surface Preparation & Shot Blasting Operations.

The Perfect Balance of Size & Performance!

Specifically designed for heavy use by shotblasters and surface preparation operators who need to pick up steel shot.

The Fission uses Bluestreak’s patented Ripwhirl technology to continuously clean shot off the magnetic drum and deposit the shot into an on board removable debris tray as you push the sweeper. The tray holds approximately 42 lbs of steel shot.

Because the drum continuously cleans off the magnet, you always have full pickup strength increasing the effectiveness of shot pickup. Because the magnet is always at full strength, all shot gets picked up without having to go over the same area several times.

The Fission has twice as much rare earth magnet as the Theta Series enabling maximum performance at cleaning shot out of expansion joints and cracks.

Productivity is greatly increased due to the elimination of the clean off and pickup efforts associated with conventional magnets.

Shop Online

items-instock-min

All Items in Stock

We stock all of our products.

Worldwide Shipping

We ship our magnetic products worldwide from Asia to the Yukon from Europe to the United Arab Emirates.

shop-online-gif2-min

Online Shopping

Easy online ordering.
Pay by Visa and MasterCard or EFT/Wire Transfer.

Automatic Discharge with more pickup power

Continuously cleans shot off the magnetic drum and deposits shot into an on board removable debris tray as you push the sweeper .

The Fission tray is twice as big as the Theta Series tray and holds approximately 42 lbs of steel shot allowing you to cover a larger area before emptying the tray.

 The Fission cleans up the same size of area faster than a traditional magnetic sweeper. Real world comparisons show that the Fission is more than twice as fast at cleaning up shot than a traditional sweeper like the Bluestreak Bora magnetic sweeper. That’s less than half the time picking up shot if you use the Fission. The resulting labor savings frees people up to do other work and gets the job done faster or reduces your need for staff.

There is a real improvement experienced by the operator of the Fission because there is not as much bending over involved. The tray holds 42 lbs of shot, it’s easy to see when the tray is full and when it’s full the handle is easy to grab and you just dump it into whatever you want. The sweepers are so easy to use that its turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.

The Fission is designed to last. And because of the quality of its design and construction and because of the availablity of replacement parts when needed you can keep your Fission going for years resulting in lower long term costs of ownership compared to many cheaper magnetic sweepers. Parts are available for the Fission on this website or from Bluestreak dealers.

Recommended Industry Applications

  • Shot Blasting or Surface Preperation Only
Play Video

The Fission on a road reconstruction site in the Sanriku district in Japan after the Great East Japan Earthquake of 2011.

Automatic Continuous Discharge System

 The Fission uses Bluestreak’s patented Ripwhirl technology to continuously clean shot off the magnetic drum and deposit the shot into an on board removable debris tray as you push the sweeper. 

Payment Methods

VisaMasterCard-min

We Accept

Pay by Visa and MasterCard Credit Cards.

WireTransfers-min

EFT or Bank Wire

Pay by Electronic Funds Transfer or Bank Wire Transfer.

governmentPOs-min

Government PO

If you are a government organization you can order with a Purchase Order and pay in net 30 days by cheque.

Larger Debris Bins On Board

The Fission tray is twice as big as the Theta Series tray and holds approximately 42 lbs of steel shot allowing you to cover a larger area before emptying the tray. There is a real improvement experienced by the operator of the Fission because there is not as much bending over involved. The operator doesn’t have to keep going over the same area to pick up all the steel shot because the Fission gets it all in one pass. There’s also no guess work involved to know when the magnet is full of steel shot. It’s easy to see when the tray is full and when its full the handle is easy to grab and you just dump it into whatever you want. The sweepers are so easy to use that it’s turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.

Durable Steel Handle and Comfortable Grips

Double steel handle with durable padded hand grips provide comfort and durability and positions your hands for easy pushing.

Tremendous Amount of Power

The Fission is made with super strong permanent magnets made from alloys of rare-earth elements that handles picking up shot of all sizes very well.

The magnet power from these magnets cleans out expansion joints and cracks because it picks up 100% of shot from 1 3/4″ below the bottom of wheels which will result in less shot showing up in the finished floor coating resulting in higher quality results.

Additional Features

  • Automatic Continuous Discharge System continuously cleans shot off the magnetic drum and deposits shot into an on board removable debris tray.
  • Large Debris Bins holds 42 lbs of shot.
  • Designed to last.
  • Permanently charged N42 Rare Earth Magnets for increased power.
  • Durable Handle Grips.
  • Double Steel Handle for Durability.
  • Non-marking Thermoplastic Rubber Wheels with sealed bearings won't leave marks on floor surfaces and no dust or grit can get into bearings.
  • 8" wheels have a 700 lb rating each with a 5/8″ precision ball bearing and rugged polypropylene hubs.

Fission Specifications

Specification Details on the Fission

* There are no CAD drawings available for this product.

Fission Series

Fission 25
Sweeper Width 25″
Ground Clearance 0.340 inches at lowest fin point
Cleaning Method Automatic Continuous Discharge
Height Adjustability None
Housing Construction One Piece Extruded PVC Design
Wheels Front 8″ and rear 3″ Thermoplastic rubber, non-marking with 5/8″ sealed precision bearings, and rugged polypropylene hubs, 8″ wheels and have a 700 lb load rating.
Magnetic Surface Area N/A
Maximum Lifting Height Will pick up 100% of shot from 1 3/4″ below wheels, and decreasing percentage of shot as floor cracks get deeper.
Total Sweeper Weight 43 lbs
Shipping Dimensions 36″L x 21″W x 11″H
Maintenance None
SKU FN25
Shipping Weight 49 lbs

Fission Literature

Fission Series Brochure PDF

Fission Series Brochure PDF

File Size: 204.99 KB
Download Count: 881

Fission Assembly Instructions PDF

Fission Assembly Instructions PDF

File Size: 271.17 KB
Download Count: 882

Fission Operating Instructions PDF

Fission Operating Instructions PDF

File Size: 218.66 KB
Download Count: 854

Fission PVC Replacement Drum Assembly Instructions

Fission PVC Replacement Drum Assembly Instructions

File Size: 452.84 KB
Download Count: 251

Made in Canada

canadian-flag-r-min

Made in Canada

All products proudly designed and manufactured in Canada
(since 2005).

handshake-min

No USA/Canada Border Issues

We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.

stocked-shelves-20-r-min

All Products in Stock

All products are stocked for quick shipping and delivery.

Fission Pricing

fission-series-magnetic-sweeper-bluestreak-equipment-750px
Fission 25
USD$2,599.99 USD
25 inch wide
Lifting Height 2.5"
Sweeper weight 43 lbs

* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.

Fission Parts

Product Reviews

Fission Magnetic Sweeper
Average rating:  
 2 reviews
by Kazuhiko Miura - Blastluck on Fission Magnetic Sweeper
Industry: Shot Blasting
Location: Japan
Product SKU: AT52

The Fission is easy to turn around, so it is ideal to walk and collect the steel shot material while replenishing the shot blasting machine.



The location of the video and pictures is the reconstruction of the Sanriku district in Iwate Prefecture that was destroyed by the tsunami in the March 2011 great East Japan earthquake. We made a new road and scooped out a construction that shot blasts beautiful stones. The Bluestreak sweeper was active in this construction.













by Tyler Wiggins - Innovatech Surface Prep Equipment on Fission Magnetic Sweeper
Demonstration Video
Industry: Surface Preparation
Location: Washington, USA
Product SKU: FN25

Go ahead, share it…

Follow us on Facebook I Subscribe to our YouTube Channel