ISO™ Magnetic Sweeper
The ISO hanging magnetic sweeper moves up and down easily.
Super Controlled Hanging Magnet!
The ISO is a hanging magnet designed for mounting under commercial type vehicles such as street sweepers, shunt/yard trucks, larger commercial trucks as well as standard pickup trucks. Once mounted it picks up metal debris that causes flat tires such as nails, screws, wire, discarded pieces of metal from fabrication activities, bolts, nuts, pins, miscellaneous metal pieces, etc.
The ISO is designed with complete stability and control in mind, solving many of the problems associated with hanging magnets.
It comes with 6 stabilizing chains, Dynatread Thermoplastic rubber Bumper Wheels on each end and an easy height adjustment feature that allows complete control over the height of the magnet once it is mounted.
The ISO also comes with a durable Quick Clean Off Sleeve for easy removal of debris.
And to keep the ISO’s long term performance power, the ISO utilizes permanently charged C8 Ceramic Magnets that will never need to be recharged. These magnets provide a strong magnetic field with a maximum lifting height of 9 inches using a 2.5″ nail. Performance power will never decrease, ensuring years of use.
Two fully enclosed Actuators make controlling the magnet’s height quick and easy.
For The Perfect Fit
The ISO is available in 4 different sizes!
The ISO comes in 4 different sweeper widths of 62″, 74″, 86″ and 98″ to accommodate many different vehicle sizes and uses. The ISO can be front, mid or rear mounted on a variety of vehicles as long as enough clearance and space is present.
As a hanging magnet, the ISO has no specific requirements of the vehicle to ensure FIT. You should however, take a look at the CAD files showing overall dimensions of width and minimum retracted and maximum extended dimensions to ensure this magnet will work with your intended vehicle and the anticipated mounting position.
The ISO has a minimum retracted dimension of 11 inches (when raised) and maximum extended dimension of 24 inches (when lowered). The depth of the magnet from front to back (front wheel tip to back wheel tip is 10.125 inches.)
To accommodate mounting of the ISO to a vehicle it may be necessary for the purchaser to buy one of the available hanging bracket accessories. As an alternative, the purchaser can themselves design and build a suspension frame with mounting points specific to those available on the vehicle being used as well as the suggested mounting points to the ISO. Guidance on the design of such as frame is provided in the ISO Assembly and Installation Instructions.
All Items in Stock
We stock all of our products.
We ship our magnetic products worldwide from Asia to the Yukon from Europe to the United Arab Emirates.
Easy online ordering.
Pay by Visa and MasterCard or EFT/Wire Transfer.
Super Stable Magnet!
The ISO is designed as a hanging magnet that is super stable. When a hanging magnet is attached to a vehicle there can be a lot of movement and swing to the magnet when the vehicle is in motion making the magnet ineffective.
The unique ISO design eliminates this problem.
The ISO is designed to use 6 stabilizing chains to create a very stable magnet.
The ISO is also designed with heavy duty Bump Wheels on each end of the magnet. The Bump Wheels add further stability preventing the magnet from hitting the ground. The Bump Wheels are designed to hang slightly above ground, but protect the magnet from hitting the ground when the truck suspension compresses, or if there are bumps in the road.
The Bump Wheels also allow hanging the magnet lower for better performance than would be possible without Bump Wheels. They ensure a consistent height off the ground is maintained when sweeping.
The Bump Wheels are 5” Thermoplastic rubber wheels with polypropylene hubs that have a 300 lb capacity (each).
Easily Adjust the Sweeping Height
Once a hanging magnet is mounted to a vehicle it can often be quite difficult to fine tune and control the sweeper height. This is especially frustrating if operators want the sweeper raised and out of the way when it is not being used or when moving between job sites. Operators do not want to attach and reattach the magnet continuously.
The ISO makes adjusting the height of the sweeper easy!
The ISO is unique because it is designed with Actuators on either end of the magnet that make moving the magnet up and down super quick and easy. By using a cordless drill inserted into the Actuators, operators can easily control the sweeper height, moving the sweeper to the chosen sweeping height or raising it to a road traveling height.
Recommended Industry Applications
Add Optional hanging bracket accessories to make mounting easy
If you have a 2” inch receiver on either the front or rear of your vehicle you can mount an ISO using Hanging Bracket A or B (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of ISO you choose), and the 2” inch Receiver Mount Bracket. These accessories are available for purchase and will be recommended accessories when you checkout.
If you have a flat steel bumper as on many commercial trucks as shown in the picture you can mount an ISO using Hanging Bracket A or B (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of ISO you choose), and Bumper Mount Bracket A.
If you have a 2.5” inch receiver on either the front or rear of your vehicle you can mount an ISO using Hanging Bracket A or B, the 2” inch Receiver Mount Bracket and the 2.5” to 2” inch Steel Receiver Adaptor Sleeve accessory.
Quick Clean Off Sleeve
When mounting a hanging magnet under a vehicle the magnetic sweeper needs to be easy to clean off.
To clean off the ISO magnetic sweeper when full of debris, just remove the Bump Wheel bracket on one end, slide the wheels off and pull off the Quick Clean Off Sleeve. All of the debris will drop off on the side of the magnet that you pull the Sleeve off. Clean off is easy, convenient and simple.
Exceptional Pickup Performance
The ISO uses permanently charged grade C8 magnets that will never need to be recharged. Power will never decrease, ensuring years of use.
The ISO will pick up a 2.5” nail when the bottom of the magnet is 9” off the ground providing plenty of pickup power performance. Magnet effectiveness will decrease as speed and sweeping height increase so to maximize performance we recommend setting the sweeping height between 2 and 3 inches in most situations. The maximum effective sweeping height while a vehicle is moving is 5″.
The ISO magnet is completely enclosed, and the replaceable black PVC Quick Clean Off Sleeve further protects the magnet by taking all of the wear and tear of everyday use.
Wrap Around Design
The ISO is designed as an all terrain magnet which means it is designed with our “Wrap Around” feature.
The “Wrap Around” feature ensures debris never gets wiped off the bottom of the magnet. The debris that slides off the bottom just snaps onto the back of the magnet.
In practice most of the debris that is picked up ends up on the back side of the magnet when operating at speed which gives you a good indication of why we have this feature.
Long Term Durability
The ISO magnet is built for long term durability.
Metal debris hitting the aluminum magnet housing can wear the aluminum housing on the magnet over a long period of time and reduce its useful service life.
That’s why we’ve shifted the wear to the replaceable and removable PVC Quick Clean Off Sleeve that wraps around the magnet making clean off quick and easy and it extends the life of the ISO magnet.
ISO Lifting Height Test
Specification Details on the ISO:
|Cleaning Method||Quick Clean Off Sleeve||Quick Clean Off Sleeve||Quick Clean Off Sleeve||Quick Clean Off Sleeve|
|Sweeping Height Adjustability||Yes, continuous adjustment||Yes, continuous adjustment||Yes, continuous adjustment||Yes, continuous adjustment|
|Magnet Type||Ceramic 8||Ceramic 8||Ceramic 8||Ceramic 8|
|Maximum Lifting Height (using 2.5″, 8 penny nails)||9 inches||9 inches||9 inches||9 inches|
|Ground Clearance||Adjustable, with a minimum of 1.75 inches||Adjustable, with a minimum of 1.75 inches||Adjustable, with a minimum of 1.75 inches||Adjustable, with a minimum of 1.75 inches|
|Wheels||5” Dynatread Thermoplastic Rubber wheels with polypropylene hubs and 5/8 inch ball bearings rated at 300 lbs capacity each||5” Dynatread Thermoplastic Rubber wheels with polypropylene hubs and 5/8 inch ball bearings rated at 300 lbs capacity each||5” Dynatread Thermoplastic Rubber wheels with polypropylene hubs and 5/8 inch ball bearings rated at 300 lbs capacity each|
|Accessories||Comes standard with 6 stabilizing chains and Quick Clean Off Sleeve||Comes standard with 6 stabilizing chains and Quick Clean Off Sleeve||Comes standard with 6 stabilizing chains and Quick Clean Off Sleeve||Comes standard with 6 stabilizing chains and Quick Clean Off Sleeve|
|Total Sweeper Weight||210 lbs||251 lbs||292 lbs||332 lbs|
|Total Shipping Weight||226.41 lbs||268.31 lbs||310.21 lbs||351.12 lbs|
|Shipping Dimensions||72″L x 12″W x 15″H||84″L x 12″W x 15″H||96″L x 12″W x 15″H||108″L x 12″W x 15″H|
Construction Material Details
Weight: 226.4 lbs
Length: 72 (in)
Width: 12 (in)
Height: 15 (in)
Weight: 268.3 lbs
Length: 84 (in)
Width: 12 (in)
Height: 15 (in)
Weight: 310.2 lbs
Length: 96 (in)
Width: 12 (in)
Height: 15 (in)
Weight: 351.1 lbs
Length: 108 (in)
Width: 12 (in)
Height: 15 (in)
* If you want to order more than one you may add or adjust product quantities once you have added the product to your shopping cart.
Pay by Visa, Mastercard, American Express, Discover, Diners, or JCB credit card.
EFT or Bank Wire
Pay by Electronic Funds Transfer or Bank Wire Transfer.
If you are a government organization you can order with a Purchase Order and pay in net 30 days by cheque.
Made in Canada
Made in Canada
All products proudly designed and manufactured in Canada
No USA/Canada Border Issues
We handle U.S. customs clearance so you don’t have to.
Pay only the charges identified at checkout.
All Products in Stock
All products are stocked for quick shipping and delivery.
Go ahead, share it…