Details on our paint process and why it’s better
What is the painting process?
Parts are blasted with Kerfjet #80 Garnet Stone and then primered with PPG High Build Epoxy primer (2 coats). It is then finished with PPG UROTEC Gloss Black (2 coats) and allowed to dry for 1 full day.
What is the paint and primer used?
Primer (2 coats) – PPG Phillips High Build Epoxy Primer made up of 2 components, #6376042 and #737700
Paint (2 coats) – PPG UROTEC #AUE300 Gloss Black Finish plus Activator and Accelerator
Why is this a better paint process?
1. Blasting with stone rather than sand creates a cleaner and smoother finish to prep for painting which provides a high quality “smooth” finished paint appearance.
2. The paint finish is a urethane product which provides a harder finish than regular fast dry industrial paint or rust paint. This harder finish means it doesn’t scratch as easily and has a longer life.
Go ahead, share it…