Magnetic + Mechanical + Sensor Based Sorting & Cleaning Solutions to Reduce, Reuse, Recycle.
1 (519) 582-1386 (EST)
This product may be covered by one or more trade secrets, and pending or issued patents and trademarks. For a listing of our registered intellectual property, See Bluestreak Patent Information..
The PYR Wheeled Magnetic Bar Sweeper is a versatile magnet good for many applications where the terrain is flat. The PYR can be hung from almost any vehicle or piece of equipment and the flat proof bump wheels on each end make sure the magnet doesn’t hit the ground. The PYR can be receiver hitch mounted on the front (as shown in picture above) or rear receiver hitch mounted (receiver hitch not supplied).
The PYR comes with 4 stabilizing chains and 8 quick clips to mount the PYR.
Bluestreak offers 2 different sizes (or strengths) of the PYR, the 3”x3” housing size and the stronger 4.5”x4.5” housing size, to allow even higher hanging heights if necessary and better performance.
Price range: $1,298.00 through $3,035.00
See Pricing For All Models Below
$1,298.00 CAD
$1,420.00 CAD
$1,540.00 CAD
$1,660.00 CAD
$1,782.00 CAD
$1,933.00 CAD
$1,930.00 CAD
$2,168.00 CAD
$2,378.00 CAD
$2,601.00 CAD
$2,797.00 CAD
$3,035.00 CAD
| PYR Series (3″ x 3″) | PYR 38 | PYR 50 | PYR 62 | PYR 74 | PYR 86 | PYR 98 |
|---|---|---|---|---|---|---|
| SKU | PY38/3 | PY50/3 | PY62/3 | PY74/3 | PY86/3 | PY98/3 |
| Sweeper Width | 38″ | 50″ | 62″ | 74″ | 86″ | 98″ |
| Ground Clearance | adjustable, with a minimum of 1.75” inches | adjustable, with a minimum of 1.75” inches | adjustable, with a minimum of 1.75” inches | adjustable, with a minimum of 1.75” inches | adjustable, with a minimum of 1.75” inches | adjustable, with a minimum of 1.75” inches |
| Cleaning Method | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. |
| Sweeping Height Adjustability | Yes, 1.75” minimum, 2.25” recommended, 3” maximum | Yes, 1.75” minimum, 2.25” recommended, 3” maximum | Yes, 1.75” minimum, 2.25” recommended, 3” maximum | Yes, 1.75” minimum, 2.25” recommended, 3” maximum | Yes, 1.75” minimum, 2.25” recommended, 3” maximum | Yes, 1.75” minimum, 2.25” recommended, 3” maximum |
| Magnet Type | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 |
| Housing Construction | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum |
| Wheels | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. | 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings. |
| Maximum Lifting Height (using a 2.5 inch nail) | 6” inches | 6” inches | 6” inches | 6” inches | 6” inches | 6” inches |
| Total Sweeper Weight | 42 lbs | 54 lbs | 66 lbs | 79 lbs | 91 lbs | 103 lbs |
| Total Shipping Weight | 52.8 lbs | 68 lbs | 82.3 lbs | 95.5 lbs | 103.8 lbs | 116.8 lbs |
| Maintenance | None | None | None | None | None | None |
| Accessories | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips |
| Pricing Range | $1,298.00 CAD | $1,420.00 CAD | $1,540.00 CAD | $1,660.00 CAD | $1,782.00 CAD | $1,933.00 CAD |
| PYR Series (4.5″ x 4.5″) | PYR 38 | PYR 50 | PYR 62 | PYR 74 | PYR 86 | PYR 96 |
|---|---|---|---|---|---|---|
| SKU | PY38/4.5 | PY50/4.5 | PY62/4.5 | PY74/4.5 | PY86/4.5 | PY96/4.5 |
| Sweeper Width | 38″ | 50″ | 62″ | 74″ | 86″ | 96″ |
| Ground Clearance | adjustable, with a minimum of 1.875” inches | adjustable, with a minimum of 1.875” inches | adjustable, with a minimum of 1.875” inches | adjustable, with a minimum of 1.875” inches | adjustable, with a minimum of 1.875” inches | adjustable, with a minimum of 1.875” inches |
| Cleaning Method | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. | Wipe clean with glove or rag. Optional Quick Clean Off Sleeve available. |
| Sweeping Height Adjustability | Yes, 1.875” minimum, 2.375” recommended, 5” maximum | Yes, 1.875” minimum, 2.375” recommended, 5” maximum | Yes, 1.875” minimum, 2.375” recommended, 5” maximum | Yes, 1.875” minimum, 2.375” recommended, 5” maximum | Yes, 1.875” minimum, 2.375” recommended, 5” maximum | Yes, 1.875” minimum, 2.375” recommended, 5” maximum |
| Magnet Type | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 | Ceramic 8 |
| Housing Construction | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum | 1/8” thick 6061 Aluminum |
| Wheels | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) | 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings (300 lbs capacity each) |
| Maximum Lifting Height (using a 2.5 inch nail) | 9 ¼” inches | 9 ¼” inches | 9 ¼” inches | 9 ¼” inches | 9 ¼” inches | 9 ¼” inches |
| Total Sweeper Weight | 126 lbs | 160 lbs | 193 lbs | 227 lbs | 260 lbs | 293 lbs |
| Total Shipping Weight | 166.1 lbs | 207.6 lbs | 248.4 lbs | 289.9 lbs | 330.3 lbs | 375.8 lbs |
| Maintenance | None | None | None | None | None | None |
| Accessories | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips | Comes standard with 4 stabilizing chains and 8 quick clips |
| Pricing Range | $1,930.00 CAD | $2,168.00 CAD | $2,378.00 CAD | $2,601.00 CAD | $2,797.00 CAD | $3,035.00 CAD |
A: 4 Steel anchor points for more mounting options and sway prevention
B: 1/2” Diameter Stainless Wheel Bolts
C: 7” Diamond Tread steel rubber bump wheels with 1/2” ball bearings
D: 1/8” thick 6061 Aluminum Housing
E: 3/8” Thick Bolted Steel End Caps
A: 1/2” Diameter Stainless Wheel Bolts
B: 7” Diamond Tread steel rubber bump wheels with 1/2” ball bearings
C: ¼” thick aluminum end cap cover (to break magnetic circuit)
D: 3/8” thick x 4” x 6” steel angle End Caps
E: 1/8” thick aluminum housing
F: 5000lb D-Ring Bolted Through Aluminum Housing and Directly into 3/8” Thick Tapped Steel End Caps
A: Bottom of Housing to Bottom of Wheel
A: A = Distance from Magnet (Sweeping Height)
Note: Gauss (G) shown as the peak gauss measured in the center of the magnet at each distance.
PYR 4.5” x 4.5” – Heavy Duty Construction
A: 4 Steel anchor points for more mounting options and sway prevention
B: 1/2” Diameter Stainless Wheel Bolt
C: 3/16” Steel Wheel Plates
D: 5” Dynatread thermoplastic rubber bump wheels with 5/8” ball bearing rated at 300lbs each
E: 1/8” thick 6061 Aluminum Housing
F: 3/8” Thick Bolted Steel End Caps
A: 5000lb D-Ring Bolted Through Aluminum Housing and Directly into 3/8” Thick Tapped Steel End Caps
B: 1/2” Diameter Stainless Wheel Bolts
C: 3/16” thick steel wheel plates
D: 5” Dynatread thermoplastic rubber bump wheels with 5/8” ball bearings rated at 300lbs each.
E: ¼” thick aluminum end cap cover (to break magnetic circuit)
F: 3/8” thick x 4” x 6” steel angle End Caps
G: 1/8” thick aluminum housing
A: Bottom of Housing to Bottom of Wheel
A: A = Distance from Magnet (Sweeping Height)
Note: Gauss (G) shown as the peak gauss measured in the center of the magnet at each distance.
| 5 star | 0% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Sorry, no reviews match your current selections
$649.00
$121.00
Price range: $1,329.00 through $1,691.00
Price range: $120.00 through $181.00
The optional aluminum quick clean off sleeve is available for all 4.5” x 4.5” magnets in lengths of 62, 74”, 86” and 98”. These sleeves are far stronger than the PVC models (SEE DURABILITY TEST HERE) and protect the magnet assembly from impacts. PVC sleeves can also deform from the pressure of collected debris being pulled towards the magnet housing making them hard to pull off. The aluminum sleeves will not deform and the plastic rails on the inner corners of the sleeve allow for smooth operation. An extendable stainless-steel handle is also stored inside the sleeve to make removing the sleeve even easier. The aluminum quick clean off sleeve is a great solution for rough terrains and prevents having to buy a new PVC sleeve every time it cracks from hitting obstacles in rough conditions.
Both sizes of the PYR Wheeled Magnetic Bar Sweeper have a strong magnetic field with a maximum lifting height for the 3”x3” model of 6” inches using a 2.5” inch nail, and a maximum lifting height for the 4.5”x4.5” model of 9 ¼” inches. (We use a 2 ½” nail to measure maximum lifting heights of all of our sweepers because it is a standard well know item familiar to customers. Keep in mind the maximum lifting heights will vary depending upon the shape and ferrous content of the items you are trying to pickup)
The standard method of cleaning off the PYR is by wiping debris off with either a rag or a glove. However, thanks to the optional Quick Clean Off Sleeve accessory shown below its possible to clean the PYR off quickly and easily while the magnet is still in its hanging position underneath a piece of equipment.
The PYR Wheeled Magnetic Bar Sweeper comes in 6 different sweeping widths (magnet bar lengths) of 38”, 50”, 62”, 74”, 86” and 98” to accommodate many different vehicle sizes and uses. The PYR can be front, mid or rear mounted on a variety of vehicles as long as enough clearance and space is present. We obviously recommend front mounting a magnet sweeper when at all possible so that you don’t run over the debris with your vehicle before picking it up.
The PYR also comes in 2 different magnet strengths:
3”x3” housing size – maximum pickup height 6” inches (using a 2 ½” nail)
4.5”x4.5” housing size – maximum pickup height 9 ¼” inches (using a 2 ½” nail)
PYR Magnetic Sweeper Weights by model and sweeping width
| Model/Width | 38” | 50” | 62” | 74” | 86” | 98” |
| 3”x3” | 42 lbs | 54 lbs | 66 lbs | 79 lbs | 91 lbs | 103 lbs |
| 4.5”x4.5” | 126 lbs | 160 lbs | 193 lbs | 227 lbs | 260 lbs | 293 lbs |
As a hanging magnet, the PYR has no specific requirements of the vehicle to ensure FIT. You should however, take a look at the CAD files showing overall dimensions of width and height to ensure the PYR will work with your intended vehicle and the anticipated mounting position.
The PYR comes standard with 4 mounting chains and 8 quick clips, however to accommodate mounting of the PYR to a vehicle, especially in the case of front or rear hitch mounting, it may be necessary for the purchaser to buy one of the available hanging bracket accessories. As an alternative, the purchaser can themselves design and build a suspension frame with mounting points specific to those available on the vehicle being used as well as the suggested mounting points on the PYR.
The PYR Wheeled Magnetic Bar Sweeper utilizes permanently charged C8 Ceramic Magnets to provide a strong magnetic field with a maximum lifting height of 6” inches for the 3”x3” housing size, and a maximum lifting height of 9 ¼” inches for the 4.5”x4.5” housing size (using a two and a half inch nail).
The PYR Wheeled Magnetic Bar Sweeper will pick up a 2 ½” nail when the bottom of the magnet is 6” inches or 9 ¼” off the ground providing plenty of pickup power performance when operating on a moving vehicle.
PYR 62 (3”x3”) pick up power demonstration with a selection of wrenches
PYR 3”x3”
Sweeping height is adjustable on the PYR 3”x3” model from a minimum of 1.75” inches with the bump wheels touching the ground to a maximum of 3” inches. We recommend a 2.25” inch sweeping height with the bump wheels ½” off the ground for optimal performance.
PYR 4.5”x4.5”
Sweeping height is adjustable on the PYR 4.5”x4.5” model from a minimum of 1.875” inches with the bump wheels touching the ground to a maximum of 5” inches. We recommend a 2.375” inch sweeping height with the bump wheels ½” off the ground for optimal performance.
The PYR 3”x3” models have 7″ diamond tread lawnmower wheels with steel hubs and 1/2 inch ball bearings.
The PYR 4.5”x4.5” models have 5″ Dynatread Thermoplastic Rubber Wheels with Polypropylene Hubs and 5/8 inch ball bearings rated at 300 lbs capacity each.
Optional extruded PVC Quick Clean Off Sleeve for removing debris from the sweeper. Clean the PYR Wheeled Magnetic Bar Sweeper off while it is still in a hanging position underneath of your equipment, something that is not possible with a kick down plate design. If the debris is removed by using a kick down or toe plate then as soon as the plate is put back in its original position, the magnet would pick up all the debris again. Therefore a kick down plate never works for magnet clean off when the magnet is hanging, it only works if used with a forklift, where the forklift can pick the magnet up away from the ground. This Quick Clean Off Sleeve accessory is available for both models and all widths of the PYR.
A: 6204-2RS Sealed high speed ball bearings
B: 5/8” OD 304 Stainless steel wheel bolt with serrated flange
C: 1300lbs load capacity
D: ADC 12 Cast aluminum hub
E: Precision machined aluminum bushings
F: 85 Shore A high elastic polyurethane
This wheel kit replaces the standard wheel and axle bolt assembly. The 8” inch wheel fits 3” x 3” inch models. This wheel is an upgrade that is built of stronger materials that can withstand more abuse in on and offroad settings. The sealed highspeed bearings keep dirt out so the polyurethane tread wheels can spin smoothly. The bearings and wheels are resistant to damage from impacts at speed so if the sweeper is expected to withstand heavy use in rough conditions this wheel will last longer and perform better than the standard option.
See how to easily mount a hanging magnet to the front bumper or rear hitch of your truck using our optional hanging magnet brackets.
A: Hanging Bracket C
B: 2” Inch Reveiver Mount Bracket
If you have a 2” inch receiver on either the front or rear of your vehicle you can mount a hanging magnet using one of the available Hanging Brackets (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of hanging magnet you choose), and the 2” inch Receiver Mount Bracket. These accessories are available for purchase and will be recommended accessories when you checkout.
A: Bumper Mount Bracket A
B: Hanging Bracket B
If you have a flat steel bumper on your commercial truck, you can mount a hanging magnet using one of the available Hanging Brackets (check the Hanging Bracket Selection Chart and FIT Guidelines to determine which based on the size of a hanging magnet you choose), and Bumper Mount Bracket A.
A: Push until holes line up
B: 2” inch receiver on truck
C: 2.5” inch to 2” inch steel receiver adaptor sleeve
If you have a 2.5” inch receiver on either the front or rear of your vehicle you can mount a hanging magnet using one of the available hanging brackets with the 2” inch receiver mount bracket and the 2.5” to 2” inch steel receiver adaptor sleeve accessory.
A: Hanging bracket D with easy height adjustment for hanging magnets with outrigger
Hanging Bracket D is compatible with the same magnets as Hanging Bracket C but features screw driven cable actuators on both ends for easy height adjustment (not needed if sweeper has built in height adjustment features).
A: Hanging Bracket E attaches to snowplow mount
B: Kubota snowplow mount for hanging bracket works with all Bluestreak hanging brackets
Hanging Bracket E is compatible with the same magnets as Hanging Bracket B (except Wrasse & Gobie) but features screw driven cable actuators on both ends for easy height adjustment (not needed if sweeper has built in height adjustment features).
- No Surprise Border / Tariff Fees After Checkout
- Fast Shipping
- All Items in Stock
English English 
English (Canada)
English (UK)
English (Australia)
Français du Canada
Español de México
Deutsch (Sie)
Português
Italiano
Polski
Nederlands
