
Magnetic Sweepers For Surface Preparation Operations

Bluestreak has a number of magnetic sweepers designed to pick up steel shot.
Each magnetic sweeper offers different benefits to the user such as increased power or increased productivity gains.
Our aim is to provide a series of tools to meet the needs of the small shotblaster as well as the large shotblasting company and to provide each user short payback periods from using Bluestreak magnetic sweepers.
Take a look at this one page comparison chart of the Magnetic Sweepers we offer for shot blasting surface preparation contracters. This chart quickly shows the differences between the Magnetic Sweepers available. Further information is also outlined below.
One page comparision chart 


|
The Bora Series™

View pricing and specifications
View photos 
View videos 
|
Quick and Easy Clean Off Without Lifting or Bending Over!
- Debris release handle lifts magnetic housing out of the tray. Debris then drops off the bottom of sweeper, no lifting or bending over.
- Control the sweeping height with three wheel settings of 1.5", 2.5" and 3.5" to accommodate any situation.
- Double layer of permanently charged magnets for a greater magnetic field and maximum lifting power.
- Available in three sizes to maximize efficiency and maneuverability (25", 31" and 37").
- Sturdy 8" steel hub and ball bearing wheels for durability, easy maneuvering and easy pushing.
- Rugged durability for professional and industrial use. All moving parts are protected by nylon flange bushings to reduce wear and extend sweeper life.
- Quickly recover nails, screws and other metal debris.
- Maintenance free all weather Aluminum housing with 1/8" walls, won't rust in wet or damp conditions.
- Available in 3 widths of 25", 31" and 37"
- Easy to store and transport - designed to stand upright on its own when not in use, making it visible and less likely to be run over by other equipment.
|
|
The GAMMA Series™
View pricing and specifications
View Photos
View Videos
|
Protective Cover Shields Magnet From Stray Steel Shot
- Debris release handle lifts magnetic housing out of the tray. Debris then drops off the bottom of sweeper, no lifting or bending over
- Padded Grip on debris release handle that rotates for comfortable use
- Control the sweeping height with 6 wheel settings to accomodate any situation
- Double layer of permanently charged magnets for a greater magnetic field and maximum lifting power
- Available in one 25" width size only
- Black ABS cover with hair cell finish keeps steel shot off the top of magnet
- Nylon flange busings on all moving parts for years of long life
- Heavy duty 8" composite hub and ball bearing wheels with grease nipples for durability and easy pushing

|
|
The Theta Series™
View pricing and specifications
View Photos
View Videos
|
A Continuous Discharge Magnetic Sweeper For Surface Preparation Operations
- Automatic Continuous Discharge System continuously cleans shot off its' magnetic drum and deposits shot into an onboard removable debris tray as you push the sweeper. Tray holds approximately 22lbs of steel shot.
- Increases productivity and effectiveness of shot pickup.
- Long maintenance free life. N42 rare earth magnets won't lose their strength over time.
- Light sweeper weight of 21lbs makes work less tiring.
- Quickly recover steel shot of all sizes
- Durable hand grip
- Non-marking Thermoplastic rubber wheels with sealed bearing won't leave markes on floor surfaces and no dust or grit can get into the bearings.

|
|
The Fission Series™
View pricing and specifications
View Photos
View Videos
|
A Continuous Discharge Magnetic Sweeper with Increased Power and Shot Capacity For Larger Shotblasting Surface Preparation Operations
- 25" magnetic sweeper.
- Ripwhirl Technology and twice as many rare earth magnets as the Theta Series for deeper cleaning of concrete expansion joints and cracks.
- Bigger debris collecting tray that holds twice as much steel shot as the Theta series (42 lbs), allows longer sweeping time before emptying.
- Pick up steel shot 55% faster than traditional magnetic sweepers.
- Continuously discharges steel shot that is picked up into a removable onboard tray for easy dumping later.
- Picks up 100% of steel shot from cracks up to 1 3/4" deep.

|
|
The Atmos Series™
View pricing and specifications
View Photos
View Videos
|
Our Largest Continuous Discharge Magnetic Sweeper For Larger Shotblasting Surface Preparation Operations
- 52" magnetic sweeper.
- Converts to a tow behind.
- Increases productivity allowing one person to do the job of many.
- Pick up steel shot 80% faster than traditional magnetic sweepers.
- Rare earth magnets utilizing Bluestreak's patented Ripwhirl Technolgy provide super pickup strength.
- Continuously discharges steel shot that is picked up into a removable onboard tray for easy dumping later.
- 2 Trays provide 84 lbs of steel shot capacity allowing longer sweeping times before emptying.
- 2 optional trays provide an additional 84 lbs of capacity.

|
|
The Eiger Series™
View pricing and specifications
View Photos
View Videos
|
A Belt Drive Continuous Discharge Magnetic Sweeper for Shot Blasting Operations
- Automatic Continuous Discharge System continuously cleans shot off its magnetic drum and deposits shot into a debris bin as you push the sweeper.
- Increases productivity and effectiveness of shot pickup.
- Comes fully assembled just insert handle.
- Long maintenance free life. Magnets won't lose their strength over time.
- Magnetic combination of ceramic and rare earth magnets.
- Turns on a dime because of two 5 inch casters on the front of the sweeper.
- Two stainless steel pails come standard with sweeper.
- Quickly recover steel shot of all sizes

|
