![]() |
|
|
Specifications for Fission Series |
|
Equipment Type: Push style magnetic sweeper in one 25 inch width. |
|
Sweeping Width: |
Fission25 - 24" |
Ground Clearance: |
0.340 inches at lowest fin point |
Price in US$: |
Fission25 - $1399.99 |
Cleaning method |
|
Lifting Weight using 2 1/2", 8 penny nails: |
N/A |
Height Adjustability: |
None |
Housing Construction: |
High impact PVC |
Wheels: |
Front 8" and rear 3" Thermoplastic rubber, non-marking with 5/8" sealed precision bearings. |
Magnetic Surface Area: |
N/A |
Maximum Lifting Height: |
Will pick up 100% of shot from 1 3/4" below wheels, and decreasing percentage of shot as floor cracks get deeper |
Total Sweeper Weight: |
Fission25 - 41 lbs |
Maintenance: |
None |
SKU #: |
FN25 |
Ship Weight: |
47 lbs |
Box Size: |
35" x 20" x 10" |
![]()
![]()
![]()
![]()
A Continuous Discharge Magnetic Sweeper For Shotblasting Surface Preparation Operations
Series Overview
Specifically designed for heavy use by shotblasters who need to pick up steel shot of all sizes from S170 to S550.
The Fission uses Bluestreak's patented Ripwhirl technology to continuously clean shot off its magnetic drum and deposit the shot into an onboard removable debris tray as you push the sweeper. The tray holds approximately 42lbs of steel shot. Because the drum continously cleans off the magnet, you always have full pickup strength increasing the effectiveness of shot pickup.
The Fission has twice as much rare earth magnet as the Theta Series enabling maximum performance at cleaning shot out of expansion joints and cracks. Productivity is greatly increased due to the elimination of the clean off and pickup efforts associated with conventional magnets.
![]()
- Automatic Continuous Discharge System continuously cleans shot off the magnetic drum and deposits shot into an onboard removable debris tray as you push the sweeper.
- Large Shot Tray: The Fission tray is twice as big as the Theta Series tray and holds approximately 42lbs of steel shot allowing you to cover a larger area before emptying the tray.
- Increases Effectiveness: Cleans out expansion joints and cracks because it picks up 100% of shot from 1 3/4" below the bottom of wheels which will result in less shot showing up in the finished floor coating resulting in higher quality results.
- Increase Productivity: Quickly recover steel shot of all sizes. The Fission cleans up the same size of area faster than a traditional magnetic sweeper. Real world comparisons show that the Fission is 55% faster at cleaning up shot than a traditional sweeper like the Bluestreak Bora Series or Gamma Series magnetic sweepers. That's less than half the time picking up shot if you use the Fission. The resulting labour savings frees people up to do other work and get jobs done faster or reduces your need for staff.
- Increased Ease of Use: There is a real improvement experienced by the operator of the Fission because there is not as much bending over involved. The tray holds 42 lbs of shot, it's easy to see when the tray is full and when it's full the handle is easy to grab and you just dump it into whatever you want. The sweepers are so easy to use that it's turns an undesirable job into one that no one minds doing. It's like using a power circular saw versus a handsaw.
- Reduced Long Term Cost: The Fission is designed to last. And because of the quality of its design and construction and because of the availablity of replacement parts when needed you can keep your Fission going for years resulting in lower long term costs of ownership compared to many cheaper magnetic sweepers. Parts are available for the Fission on this website or from Bluestreak dealers.
- Increase Your company's adaptability / flexibility to economic cycles: When you're really busy the Fission allows you to get the job done faster with the same amount of staff without hiring and when things slow down you won't have too many staff.
- Long maintenance free life. N42 rare earth magnets won't lose their strength over time and are permanently charged. Wheels have a 700 lb rating each with a 5/8" precision ball bearing, rugged polypropylene hubs with thermoplastic rubber tires for durability.
- Double steel handle with durable hand grips provide comfort and durability.
- Non-marking Thermoplastic rubber wheels with sealed bearings won't leave markes on floor surfaces and no dust or grit can get into the bearings.
- The Fission comes almost fully assembled with just the handle and rear wheels to attach.
Recommended Applications:
- Shot Blasting Only
![]()
Add a Fission Continuous Discharge
Magnetic Sweeper to your shopping cart![]()








